Search results

Rear wheels definitely need adjusting and are tipping in at a whopping 35mm at the top, way more than the manual recommends in installing maximum number of extra shims for as per this chart. Has anybody dealt with this before or has a fix?

Thanks. He's turning them from the opposite side too....although he dont seem to have a very long screwdriver, but may have longer arms. Thought the 3200 was same physical size as the 3300. Anyway, it's a crappy way of having to work the bypass valve.

Just venting guys. Changed my Hydro filters for the first time yesterday at 90 hours and had to bypass them to bleed air out, which was quite an ordeal. Only way to turn the valve was from to opposite side with a long screwdriver. Had nothing long enough to reach them and had to weld some round...

Oh boy

Not sure if this mower has a vented tank cap or not. Something to check into though and make sure it's not plugged up

And? What was wrong with it????

Only you know that. ETC keeps the rpm up in tall grass were others would slow down. Flat-free front tires, nicer seat. I forget exactly what the differences are. Best to go check them out. I used to have a Kubota F2690 and am wanting one again. As nice as the Ferris is, i'll be trading it.

I have a "All American Sharpener" and am very happy with it. Using 40 grit floppy disks

Happened to me once on a IS5100Z. In my case it was nothing other than getting to hot. Screen behind the seat was plugged up. Cleaned it, let it idle for a few minutes and away i went.

I've had my ISX 3300 EFI-ETC 18 month now with 40 hours on it and is for personal use. Works well and is a beast. Sort of hard on gas though.

I rigged this up since i get stuck 2 to 3 times a day in remote areas around a farm and fields. If no trees or fence posts around, i pound that rod in the ground and use the winch (front or read) that lives in the box

check both control arm switches? I'm thinking of getting the IS2600Z myself. Problem is lack of good dealer that stocks parts, even blades, and actually cares past making a sale near me in SW Ontario, CAN

I use a IS5100Z once/week for 8-9 hours to cut all around livestock barns and fields. There's quite a few ruts in the grass from large farm equipment's, and grass is far from smooth at best. The 5100 has no suspension seat and am not getting beat up at all, by using it all day. I have no...

Left and Right Pump Tags

Left side is not like the right side at times when trying to make small adjustments. Different feel to it..When i try to do harder adjustment to go around things or change direction, it at times does not react to what i.m trying to make it do. Does anybody have any tips for me, or has anybody...

I'm cutting grass for a Farmer friend of mine with a lot of acreage and am using his IS5100Z. With all the rain we had, i been getting stuck more often then i think is funny and find myself walking back to get my truck, so i can pull myself out. Luckily i have been able to get to the stuck mower...

Got a 6 month old Super Recycler MOD: 20384, that don't start quite as easy as it did when i first bought, but will after cranking for longer then i should have to. Then runs quite rough for a minute or so, and eventually will smooth out. I just changed oil again and looked at the plug, which...

54 inch deck and snowblower

Been lurking for a while and decided to sign up