Search results

Yes it did, it will crank over the same with plug wires attached without the choke on. I have a fully charged battery & installed a new starter also. I'm baffled by this.

I pulled the plug wires, cranked it over as if starting and it did crank better so I did the adjustment of the air gap and cranked it over without plug wires, seen no difference. Put plug wires back on and cranked it to start and it came up on compression stroke and wanted to stop, this was done...

Thanks for the great tip, I will try that this weekend and then post my results.

I added two other ground cables from the engine to the battery.Voltage does not drop below 10 VDC when cranking at the battery or starter, I seen another Thread that you should check for a bad ground by putting the negative cable to ground & positive cable to the starter housing from your meter...

I have a Kohler engine 34KH Serial# 4630606611, cranks slow when it come up on the compression stroke, has anyone else have this problem, how did you solve it? this engine has self adjusting lifters so they cannot be adjusted like the old style. Installed new battery, cleaned the battery &...

I tried cleaning all terminals, pulled plugs out, spins a little faster without plug in, It seems to want to stop on the compression stroke every time it comes to that point and then tries again. Is there a compression release on the cam?

Zero turn SMCZ-61V, SERIAL# E9702549, cranks over real slow even with a new battery, even with a jumper box, engine has self adjusting valves, does this engine a ACR or is it the starter bad, anything I can check before spending money on a starter? Could it be a timing issue? Thanks for any...