Search results

Got it! lol. 12v to the starter cable! Thank you

Wow ok. I’m just trying to get the 12v to the starter solenoid at this point. That’s the first problem. I’ve traced it to the relay. Not sure what the attitude is for but thanks anyway

I’m working on just trying to get 12v to the ignition wire on the remote starter solenoid wire at this point. I have 12v coming into the relay when the ignition switch is turned to start. I posted pics. I hear and feel the relay click. But 12v is not coming out anywhere else after the...

Also I’m not gettting 12v to the ignition wire to the solenoid....

Ok I’ll check the grounds tomorrow morning. I did test the switch. Everything tested good except for S to B which I though would have continuity with the key on. It does make continuity when the key is turned to start. is that correct for the charging?

And no no! I appreciate the help. Not sure if a safety switch is preventing the ignition wire to get voltage. Is there a way to bypass the switches for the time being? Do I skin them and twist them together and unplug them?

I’m a lineman and have a good understanding of testing. I’m using a fluke meter. I’m not getting power to the small terminal when the key is turned. That’s my first problem! Lol. min at work. I’ll get the numbera later

Ok it’s a Kohler command 735cc. New battery. New starter solenoid and new starter relay. When I turn the key I get just the click. The new solenoid is not closing. When I jump it the solenoid, it has a hard time turning the engine over, like the engine is locking up....which led me to...

That’s exactly what I’m doing I’m lost. The battery is at 12.4 and 13.5 when it was running I thought of the charging system a while back when this first started happening but the battery never got below 12 V

I’m having a lot of issues with this mower. First I thought it was running out of fuel on straightaways, so I replaced the new fuel filter with another new one and the fuel pump. Ran fine after that. next time mowing, it randomly dies. Replaced starter solenoid because it has trouble...

just got a new snapper 21" ninja mulch commercial mower....the problem i am having is that the speed control...when starting on the slow setting progressively works its way to the fastest speed. is there something i should be tightening to keep it holding it speed? the speed lever slowly moves...