Search results

f your area has any place that sell parts like auto zone etc they will rent it to you or sell you one I borrowed mine idontfly you could probably buy one let me know if you cant get one in your area I will see if they will ship one to you and see what the price will be from any one of these...

I Know you said you have a mtd lawn mower mine was a snow blower mower what I was told is go to a auto zone or etc. and ask for a wheel puller it has 4 jaws and heat the hub the center .and turn the cross tee and it will move out. I did try your way never worked I was able to use the jaws for...

walbro wt118 3272 1105 I know there isnt a gasket for this carb I am going to buy a new carb around 20.00 dollars I want to have this for a extra I have tryed other parts departments they say none are to be found SO the cork gasket is to thick I am new to this wish I could read up on this...

there isnt a replacemnet part for that I have tryed

I own a troy-biltt trimmer. its a TB22EC . I know there isn't a replacement for the part . it is Air Cooled 2- Cycle. 25cc manufacture number for Carburator is 753-06190 there is no part number the gasket is torn. I have cork gaskets can that be used instead. for the part

Star tech that baffle plate isn't like the one I have. When I put the shroud over the plate to tighten it down. it has the 2 outer bolts but it moves a little bit. but there are none on the bottom of the plate. to hold it in place. model OV358EA.Would the shroud and the baffle interlock with...

These are the screws numbers161- 252 there should be another one near the spark plug? plus what hold the baffle number 25 down? i see screw number 26 I don't see where that hold down the baffle the only one is number 252 that hold down the dipstick and to the baffle .But the baffle seems to...

Sorry for the delay. the spec is 206940G DOM IS 07040CBO161 Engine Family is 7TPX8.3582AA Hope this helps

I will check it tomorrow on the engine look for the plate with the date of the engine.I am always willing to learn. I do home remodeling for my self .if you try hard enough it will come out great

Yes I did set the gap at 0.010. its runs great at my age 77. I am starting to learn more. I did pull the shroud a few times since I bought it and it works great now from the help I am getting here.I have neglected some what . i also did one other thing to my engine I put lock nuts to stop it...

I have a Tecumseh engine 13.5 h.p. OV358EA, engine. I need to know the size of the bolts that connect to the dip stick 1?. 2 one is at the back where the spark plug is at? and the 3 one is on the other side from the dip stick? when the shroud is all connected to the baffle I believe it should...

I did test it out and I bought a ignition coil for replacement . Know I must see what gauge it is from the flywheel to coil magnetic

Tecumseh ovv358ea need spec on ignition coil magginto or send me site where spec is at

I would like to thank you ocean for your input .I did what you have advised me to try .And the last thing you advised me to try was the spark. I tested the spark plug and that was ok but not starting I did test the the magginto ignition coil that was defective .after replacing it it started up...

I own a 2007 Riding Lawn mower its a 13a1762f729 unit I believe it has a briggs engine .Its same as a Yard machine unit. I tryed to start my riding mower it would turn over, but it wont start .I never had a problem with it. I have checked for wires chewed ok changed the gas blew out Filter...