Search results

Results 1 to 16 of 16
  1. J

    Cub Cadet XT1 - Slipped Drive Belt? Not going Forward or Backward - appears to be a Drive Belt problem (slipped off of the idler pulley(s) ?)

    Cub Cadet XT1 - LT1 42" Model #: 13AOA1CS056 Serial #: 18108H40302 Engine: Kohler 5400 Series 18 HP /541 cc KS540 SPEC PS-KS540-3011 Model KS540-3011 ---------------------------------------------------------- OK, so now that I've found out what was causing the 20 Amp fuse to pop - Thh Unit...
  2. J

    Cub Cadet XT1 - Keeps blowing 20 Amp Fuse when trying to start - No Crank No Start - just blowing fuses - SOLVED!!!

    Ok, I disconnected the wire on the carburetor fuel solenoid, replaced the 20 Amp ATC fuse - attempted to start it - and it blew the 20 Amp fuse (again). (Note: This was after reconnecting the voltage regulator/rectifier)
  3. J

    Cub Cadet XT1 - Keeps blowing 20 Amp Fuse when trying to start - No Crank No Start - just blowing fuses - SOLVED!!!

    I have ordered a set of resettable ATC fuses - but they have not arrived. The mower is kept in my shed - which hosts many squirrels in the winter - and it's getting cold out - so they are getting into that shed. But I don't see any evidence of chewed or bare wires. I have not had any...
  4. J

    Cub Cadet XT1 - Keeps blowing 20 Amp Fuse when trying to start - No Crank No Start - just blowing fuses - SOLVED!!!

    I WAS mistaken - The Fuse blows when I rotate the ignition switch even to the first setting!! (With or without the rectifier in the circuit - completely removed)
  5. J

    Cub Cadet XT1 - Keeps blowing 20 Amp Fuse when trying to start - No Crank No Start - just blowing fuses - SOLVED!!!

    Yes - that is where I found it. It is a Kohler Part number 25 403 35 010918 ***StarTech - I WAS mistaken - The Fuse blows when I rotate the ignition switch even to the first setting!! (With or without the rectifier in the circuit - completely removed)
  6. J

    Cub Cadet XT1 - Keeps blowing 20 Amp Fuse when trying to start - No Crank No Start - just blowing fuses - SOLVED!!!

    Kohler 5400 Series 18 HP /541 cc KS540 SPEC PS-KS540-3011 MOdel KS540-3011 ------------------------------------------------------------------------------------ Found that rascal!!!! Back by the starter! For grins and giggles - I disconnected it - replaced the 20 amp fuse - and tried again...
  7. J

    Cub Cadet XT1 - Keeps blowing 20 Amp Fuse when trying to start - No Crank No Start - just blowing fuses - SOLVED!!!

    I am still not finding the rectifier/regulator on this engine.
  8. J

    Cub Cadet XT1 - Keeps blowing 20 Amp Fuse when trying to start - No Crank No Start - just blowing fuses - SOLVED!!!

    Mine has two (2) spade bit type slide on connectors. I replaced the starter solenoid thinking that it was the problem, but it is not the problem.
  9. J

    Cub Cadet XT1 - Keeps blowing 20 Amp Fuse when trying to start - No Crank No Start - just blowing fuses - SOLVED!!!

    I WAS mistaken - The Fuse blows when I rotate the ignition switch even to the first setting!! (With or without the rectifier in the circuit - completely removed)
  10. J

    Cub Cadet XT1 - Keeps blowing 20 Amp Fuse when trying to start - No Crank No Start - just blowing fuses - SOLVED!!!

    I've got a Cub Cadet XT1 LT1 - purchased at Home Depot. It's been a great mower up until now. It won't start or crank - and keeps blowing the 20 Amp fuse that is inline with the starter solenoid. I can jump the starter with a cable from the positive to the starter -- and it will crank...
Top