Search results

Results 1 to 8 of 8
  1. Martin240

    Not a wiring guy

    I’m really getting a lesson here. I see what you’re saying, the switch is supposed to make these connections bw AB & AB S1S2. My switch isn’t bad, it checks out correctly in all positions while it’s disconnected from the wire harness. It does not check out when the wires are connected, that’s...
  2. Martin240

    Not a wiring guy

    Ok I pulled the schematics for the switch on my M2560 & it’s wired as it’s supposed to be but I have a problem. I have continuity bw all wires A S1 S2 M & G. B is the only wire wo continuity but it’s the hot wire from my battery. In the off position I should only have cont bw M&G, Run bw A&B &...
  3. Martin240

    Not a wiring guy

    Wow you’re good StarTech! That’s the exact schematic from my M2560! I can’t tell that anything is miss wired or isn’t factory, it all looks OEM. I’ll try to play around w it & see if I can switch some things up & get it going. At least I have power up top now. Any advice would be helpful...
  4. Martin240

    Not a wiring guy

  5. Martin240

    Not a wiring guy

  6. Martin240

    Not a wiring guy

    Maybe we’re getting somewhere! But now when I do that, the first click of my key cranks the engine.
  7. Martin240

    Not a wiring guy

    I have not figured it out sadly. I do have the schematics but they don’t do me any good since I don’t understand them. Yes the battery cable is connected to the larger post on the solenoid & the smaller red wire w the good 30 amp is connected to the spade post under the solenoid. There is a blue...
  8. Martin240

    Not a wiring guy

    I have a 2001 woods mow-n-machine that had a 22hp Kohler engine that crapped out. I’ve replaced it w a CV742 Kohler engine. Of course the wiring harnesses are different but when I broke it down, they both have the same white, green, red & purple wires. I matched color to color, wired the...
Top