Search results

So I finally got the mulching blades on and wow do they chop the leaves up to a fine dust.

I do a lot of backing up while cutting so I purchased a Toro zero turn that doesn't have that button to fool with. Just another thing that can go wrong.

I'm using mulching blades with a bagger and its works real well. I too had cutting blades and would fill up six recycle cans of cut up leaves. I changed the blades to mulching blades and what a difference. I would fill up only two cans. The mulching blades would cut the leaves up into a powder...

Make sure the cables are tight. Mine was doing the same thing when it was brand new and I noticed the battery cables were loose. Mine probably wasn't charging while running. I also think the hour meter I installed drains the battery.

My meter on my Toro stays on and my battery went dead after two years so I'm thinking it drain the battery since it wasn't used during the winter months..

I have a Toro My Ride 50 inch zero turn with a bagger attachment. Almost every time I go to open the back end, the whole back slides off. It has become a nuisance so I fix it so it won't come off. I drilled holes through those tiny stub it sits on and put a cotter pin in the holes. I did it to...

I fill up 8 recycle cans of leaves every week for about 5 or 6 weeks for county weekly pickups in the fall. I have a bagger on my Toro. I have cutting blades that came with the zero turn. When I empty out the two bags of leaves I fill one and a half recycle cans and I'm thinking if I had...

I've been using regular on everything for 50 years.

I park my equipment in a shed and really don't want to run 200 feet of electrical cord out to the shed and through the window with a battery tender, I ended up buying this at Home Depot to jump start it . I leave it in my wife's car in case she needs it.

I bought a Duralast 800 amp jump starter at Advance Auto and got it home and turned it on. No lights, so I plugged it in over night and still no lights. Nothing. I took it back and they refunded my $90. They said it looked used. I told them that's the one they gave me yesterday and all I did was...

What jump starters for zero turn mowers your using? I'm thinking of buying one.

I replaced my 5 gal. gas cans with these EZPour nozzles. Here I installed them. Then this happen. EZPour became EZ Leak. Gas all over the concrete patio. So I replaced the EZ Leak nozzles with a red cap and now I use this pump. No spillage at all.

I found this in Pittsburg. https://pittsburgh.craigslist.org/grd/d/beyer-craftsman-bin-bagger-complete/7677672060.html

Unfortunately I don't. I'm trying to remember where I bought it. It was a long time ago. Amazon does sell bottom chutes but there's no guarante they fit. https://www.amazon.com/Craftsman-Catcher-532405455-Compatible-Description/dp/B086DQJLVH

I had the same problem with my lower chute. I kept buying chutes and returning them until I found one that kind of fitted to the deck. But then, when I put the other chute on it became short of going into the bagger. So I bought this sheet metal and wrapped it around the chute and forced it...

My local Craigslist here in Maryland has people with baggers for sale. Here's one. You can buy this adaptor from CycloneRake and maybe fit it into the tubes you have. It cost $119. Also, sometimes Craigslist under the FarmandGarden section has baggers for sale...

I too started to see these brown spots where I stop to empty my bags of clippings. I thought that can't be the muffler. I have a metal plate under my muffler factory made. The thing covers the whole muffler and is useless. Well now I stop in the driveway to empty the contents. The filter does...

I have a 50 inch Toro Time Cutter with My Ride and love it. I only cut a half acre but the 20 minutes or so I'm on it my back doesn't hurt. My back would always hurt when I got off my Craftsman tractor. You can adjust the My Ride suspension system. You have to experience it on every setting to...

I had a guy sharpen mine at Ace Hardware years ago along with my chains for the chain saws that was very reasonable but now the price is about the same as new ones so I just buy new ones.

One other thing I like is the PTO doesn't shut off when you back up. I do a lot of backing up cutting.

I notice the curved shaft is closer to your feet when using it so I don't use it at all.

It doesn't hurt to change the air filter once or twice while doing leaf clean ups. Mine gets dirty real fast. The air filter and element is inexpensive.

Can you disconnect the meter? I can on my Toro.

I still have some leaves on trees so I may have to do another leaf clean up. Its going to be freezing cold this weekend with maybe snow but they are calling for warmer temps some days in January. Its not unusual to have a 50 degree day I can use the zero turn to help suck up leaves.

I have a Ryobi expand it gas trimmer straight shaft 2 cycle. They cost about $199. It has other attachments I can use with it. I have an edger, hedge trimmer, the weed eater, and the cultivator. The motor usually last five or six years and I have to replace it. The head on it is easy to feed the...

I was going to install that enhancement kit and notice it isn't much of an enhancement. I'm thinking over time it will collect wet grass and leaves and they will get caked up in it. It will always need to be cleaned out. I decided to return it. I've been doing leaf clean ups with the machine...

My manual says wash the bagger attachment after every use, but I know better. I always use the leaf blower after each use.

I took a picture right after I installed it. Its on, do you see the 0.0

I wonder since I have the bagger if I should get the bagging enhancement kit. Here's a detail of it. https://images.thdstatic.com/catalog/pdfImages/bc/bc496b3e-de97-4a76-aa5f-b691d1d04371.pdf

I installed a seat cover, the rubber mat for your feet, the hour meter, and the assist bar. Notice the back of the seat cover has two pockets for your gloves and safety glasses.

Since I have the bagger attachment on I wonder if I can just remove the top chute and leave the bottom chute on to mulch. Then put the top chute back on and vacuum them up.

Do you know I was blowing leaves in my front yard out towards the street and it can blow out as far out as 20 feet. I had to stop about 20 feet from the curb without them going out in the street.

The other day I didn't use the tractor lift when I installed my bagger. I had to raise the front of my Toro up to install these front bars to hold the weights. I just picked it up and set it on a saw horse I have that's 21 inches high. I'm a 68 year old. I never considered myself strong but it...

Oh Sorry, I got confused. I meant WiTimeCutter Its still on the top of page one.

I guess I'll have it facing me when I sit down next to the throttle in that slot they provide.

Today I got the bagger on my Toro My Ride. I'm thinking of buying the cover for the seat. I will buy the floor mat, assist bar and the jack you attach to the frame. And the hour meter. Which way should the hour meter be placed in that slot. Facing the outside or facing the operator?

I use the first one on my Craftsman tractor and my Toro zero turn. I stick metal pins through the holes in case the hydraulics lets out. I also place jack stands under it.

I got this today and it wasn't easy to put on. Its missing the rubber strap on the hood to lock down the hood over the bags. I will may a phone call to Toro to send me a rubber strap to lock it down. Notice I'm using a bunge cord to hold it down. Second picture, I didn't focus.

Are you trying to make it further away or closer to you? I guess further away because you have long legs.

I know a guy that has the same problem and somehow he uses the other leg to press it. I also seen it on a YouTube video.

BudLight, My Toro is built the same. I'm thinking the same thing its built that way to lift the clippings up through the bagger. I have the same problem cutting between mulch areas that one side is going to get hit with clippings. Right now, I'm using a leaf blower to blow them out but when I...

I've been using a Sears craftsman tractor for 22 years and decided to purchase a Toro My Ride model 75755 because of back problems. I purchased one from a dealer that sold John Deere tractors as well. I 'm use to using a lever to go forward and backwards on my craftsman and thought it would be...