new carburettor, when tilted sideways, far side up, carb side down it leaks fuel badly behind the air box.
do I need to turn off fuel lever every time I lift it into the boot!
thanks!
I think the governor shaft is stiff. the spring was hooked on ok but the tang was bent inwards slightly.
I straightened that. with the engine running and looking at the governor shaft I noticed it wasn't moving
when moving throttle back and forth. Using a long screwdriver I nudged it down and...
the governor shaft turned fully counter clockwise, throttle on full/fully open.
governor arm rotated also counter clockwise. governor arm bolt re-tightend.
the spring is connected on the governor arm, I will double check the governor spring
on the throttle plate. I'll get back to confirm this...
Husqvarna R15t awd. Either the revs are too high but the revs drop significantly when driving off. it does slowly pick up again.
I've been moving the throttle plate up and down to find the right position, but no luck. After replacing the govenor seal, put back
together was slightly over revving...