Search results

Solved: As long as the starter numbers are the same on your starter with or without the -s it works fine with a 9 tooth or 10 tooth, it just means an upgrade or revision

Update and Fixed: it was the Starter. thanks to all the help here getting it fixed. For other having the same problem Test your starter first with jumper cables then the Solenoid , clean all the cables from the battery to the frame and test you are getting 12 volts to the starter. I found that...

I have a 2016 XT1 Enduro Series LT 46 in. 22 HP V-Twin Kohler Hydrostatic Gas Front-Engine Riding Mower, the Starter on it is a 32-098-08, on club cadet website for my model it says 32-098-10 s, mine has a 9 tooth and the new one has 10 tooth. They want $195.00 and Amazon has them for $44.00. I...

UPDATE: Cleaned all the battery cables, I grind the frame to bare metal for battery ground and now getting 12.6 volts to starter cable, now waiting on new starter. Thanks for all your help and will update when the starter is installed.

UPDATE: I removed the Starter and used jumper cables to the battery and it does not spin or click, I taped the starter several times with same results, going to buy new starter and try, also going to buy new cables for ground and starter to have in-case and on hand for later if needed. It it...

So your saying the cable from the Solenoid to the starter is bad because it only shows 6.7 volts and not the 12 it needs?

0nly ground wire I see is is on the Solenoid green wire that clips on, the Orange and White wire goes to the key switch I think This is the OEM Solenoid This is what I ordered on Amazon and says OEM replacement part It says the Solenoid is grounded to the frame, should I add a ground wire to...

I have a XT1 Enduro Series LT 46 in. 22 HP V-Twin Kohler Hydrostatic Gas Front-Engine and Solenoid just makes a clicking noise. I replaced the Solenoid and still makes a clicking noise, Battery is new and starts my other mower, from the battery to the Solenoid is showing 12 volts but only...