Search results

Kawasaki FX850V-BS13 - put a new oem carburetor from kawasaki in after the old one got cracked by a falling tree limb. (Not my mower). Mower had been setting for awhile. After new carb install engine runs rough and backfires thru the exhaust. Found coil on left bank was week so I changed it and...

Thanks guys got the stack pulley ordered.... now just to find that damn tank lol

I need a 092504 Z stack pulley for a Murray mower model# 30544X920. Also need a B&S part# 694315 fuel tank. Or options to replace both under different part #'s.

Just checked the valves again - lash is right at 5 on both and both valves are opening and closing at the same distance

31P777- 0348- E1 040429ZE- Bought in hasn't run in a couple years. Cleaned carb- had to run valve lash to get it to crank- no fire installed new coil- changed oil and filter- new plug. Fires right up but it backfires or pops thru the carb and sometimes out the exhaust. Ran valves again they...

Sorry model is 350447 1118 E1 flywheel # is correct 808768. If you still have it I will take it.

I need a flywheel for a B&S Vanguard engine. B&S nor any of the regular parts outlets have one. Engine model #350477 1118-E1. Flywheel part# is 808768. Thanks

Finally got it- some knucklehead swapped the plugs around on the 2 parking brake switches. Once I put them right and did a little work on the seat switch she now runs like a Cadillac!! Thank you to Fish also for finding the schematic it was a life saver. Got me where I needed to be.. and thank...

Thank you

Model# 5900744 Seriel# 2013903097 So far I have narrowed it down to the seat switch which is a 2 wire plug or one of the 2 brake safety switches i think one of them might be shorting out. I believe one is brake + solenoid and the other is brake + pto not sure without ripping out a bunch of...

Sure did, it tested fine- but I went ahead and swapped it with a switch that I know is good- no difference. Beginning to think it has something to do with the 2 switches on the parking brake or the seat switch- put a jumper wire between the 2 wires on the seat switch plug- trying to work out...

Well.... diodes not the problem. Buddy had a new harness for me to try on it. Same problem as soon as I pull the button on the pto I lose all power to the engine- push the pto back in and engine picks right back up.

Simplicity model# 5900774 B&S model# 44P777 Type 0159-G1 Start up engine and pull pto switch- engine dies Bypass seat switch- pull pto switch- engine dies Checked all safety switches for continuity- all good Checked and cleaned coils- good spark- added new plugs Checked continuity from each...