Search results

of course, the battery is dead. Will charge it and plug seat switch back in and report.

I used a jumper, let me go plug it back in and try again.

RZ5424 about 15 ys old. Runs fine. Had a fuse blowing issue first. Which led to lots of new switches and parts thrown at it. Two things. Release brake engine stalls, engage pto engine stalls. Has to be a safety switch issue. Tested them all good. By passed seat switch. Engine runs well...

Looking for suggestions in regards to a back up mower I picked up. Cub cadet 60 inch Tank old model DX750?. Kohler 27 hp blew apart. Looking to replace. Does it have to be a Kohler? With the new motor specs out can I get away with a smaller engine? Are there any other type mowers that use...

good idea.... I tightened everything up and it runs better.... now the center spindle I think has gone bad.... could have been a bigger issue with the pull of RPM's when I tried to mow. A little play in the bearing up and down.

Thanks Gary.... jumped the seat switch and found the break switch failing....also thing my middle spindle is failing....pulled it today and it seems dry and it spins but not feeling smooth...maybe dirt but the bearing moves up and down a little bit.

thanks....also checked all the spindles and pulleys and found the center blade was loose...tightened it and will check the valve clearances.

New guy here..... Cub Cadet Tank with Kohler Command 27 Engine starts a little difficult but runs well. When I engage the PTO engine still runs well. But when I move forward or backward I get a loss of power and backfiring. I've cleaned out carb, plugs, checked ignition, replaced fuel...