Search results

Can a spark plug fire but have a weak spark because of a bad, weak or old plug?

Pulled plug and I see spark at plug. Not a real impressive spark but I don't know what a tiny engine spark should look like. Plug is gapped at .025. Put a little gas in cylinder and still will not fire. If it has spark and there is gas in cylinder, isn't it impossible to not fire?

My McCulloch 130 (circa 1990) chainsaw was running fine and then just stopped. Now to will not fire at all. It used to start after one pull chocked and then one pull not chocked. Any idea where to start looking?

Cub Cadet LTX1050. I just found my stabilizer link in the garage. I had forgotten to put it on the mower. Is its sole purpose to keep the deck from moving sideways? Sounds pretty unimportant considering the lift bars don't allow more than about an inch of sideways movement. Also, eliminating the...

My trans went bad and I replaced it. Now I am stuck with the old one. Is it trash or do they have a value for parts or repair? Mine is a Hydro-Gear model 618-0319.

Cadet LTX1050. When mowing deep grass my mowers electric pto shuts off by itself. I then push the pto button in and pull it back out and the mower starts cutting again. Is the a safety feature or a glitch?

Cub LTX1050 50" cut. Cub Cadet wants $46 for a set of three blades (part #942-04053c). I have seen other places that want $90. Amazon wants $30 for the set (same part #). Are these cheaper blades the same quality?

Thanks

Cub Cadet LTX1050. Deck lift lever has something like 12 positions. But in the highest position it still cuts really short like a couple of inches. Is this about right or not. I have a really deep lawn to cut and I would like to start out by cutting it 3 or 4 inches long. It will ve a strain to...

Your right. The seat switch plug was not locked in. Thanks.

LTX1050. I changed the trans drive belt. I removed the mower clutch and unplugged it. I removed the drive belt pulley. I removed the trany fan and removed the belt. I put the belt back on. Replaced the fan. Replaced the drive pulley and mower clutch and plugged it in. Now when I start the...

Thanks. Just praying its not the rings. Pray with me.

White LT1850 lawn tractor. When straining in deep grass it starts blowing black exhaust. When not straining it does not smoke. It also runs just a tad rough and at high rpms it runs a little rougher. I see that that air filter is ready for replacement and the oil looks pretty dark. I will...

2010 Cub Cadet LTX1050VT. Hydro static trans is Hydro-Gear 618-0319. Tractor barely moves and will not move at all on the slightest incline. Changed belt and had no effect. Does this PROVE that the trans is bad? Could I have a linkage problem? When I push the pedal either forward or backward...