Search results

Looks like you ran out of Yellow Paint, or just started on the underside. A good choice would be Pickup Box Rhino coating after getting it sandblasted ( SP3 Commercial Blast.) Washing the underside is a waste of time and clippings act as a blotter promoting corrosion. Run it up on a ramp and...

Do the basics. Turn off gas if you have a valve for that. Remove Fuel Filter and drain old gas and dirt from Fuel tank. Carefully remove float bowl and empty it. Replace Bowl. Fill with filtered Premium Fuel. If gas comes out freely, install new fuel filter. Blow into fuel tank and watch...

Take the top off down to the Flywheel and check under that nut to be sure that the Key has not been partially sheared which puts it out of time enough to do that . Did you remove the flywheel and examine the key? Set coil at 0.300" from Flywheel. It could be valve timing

Simply put a narrow Ratchet strap around the centre of the tread and tighten. Use Bead Sealer of course.