Search results

I have a PAS 266 Echo that the throttle trigger broke in the handle. I ordered a new one three weeks ago from the local dealer. It finally came in. The one that came in was the wrong one. I looked at some sources on line to try to find one so that I could get running. All of the sources I see...

What kind of mowers are you guys using to cut grass in cemeteries? We cut two and might be interested in doing something different than what we are doing.

Hey guys, What is the highest hours you have seen on a Scag mower?

It is so hot in Lower Alabama today that we are having to feed the chickens ice cubes to keep them from laying hard boiled eggs. I saw one hen pulling worms out of the ground with oven mitts on. It is getting so dry that the trees are chasing the dogs.

Here are my three Scags getting ready to run in the morning.

I cut a yard today that is about an acre. It is mixed with part being centipede and part having bahia grass. I have cut it probably 50 times or so and today the bahia was the toughest I have ever seen it. In fact about every yard we cut today that had some bahia grass in it and it worked on my...

What do you consider high hours on a Scag Tiger Cat? Do any of you guys who have run Scags high hours have any records of what started to break down at how many hours........? My oldest is coming on 900 hours. My second is around 800. So far on the one with 900 we have had to replace a...

I have a problem with my Toro Time Master Walk behind keeping the front end adjustment in place. It drops to the bottom as you mow. Has anybody else had this problem? I have not disassembled it yet to try to figure out what is going on. Anybody running one with the same issue please give me...

Ran into a guy this week that has a commercial operation who still has an Ever ride Mower. I have heard of these mowers often but never operated one. From what I can find out they were incredible mowers but for some reason never made a big splash market wise and were discontinued. A website I...

This week we added another Tiger Cat to our fleet. I bought my first one in July of 2014, bought the second one in April of 2015. We have had incredible service from those two. I need a third mower at times and a backup is always nice in case of an unexpected breakdown. I have found that for...

Question to commercial operators. On zero turn mowers and other at is a sizable investment. Is it more profitable to trade Zero Turns at 2 years whe the warranty is going out and replace them with new ones or run them till the wheels run off of them and keep rebuilding/repairing them till they...

We have gotten in full swing in LA now with May fast approaching. This week we actually got to work 4 and 1/2 days which it the most since the first of March when we kicked it all off. If this rain keeps coming we are going to be wide open. Hope the rest of you guys are doing good with your...

I picked up a Turf Tiger this morning to demonstrate from the dealer. I ran it a short time around lunch time. It has a 61" deck. I am not sure what is going on but it does not seem to cut as good as either of my Tiger Cats with the 52" deck. It was not cutting clean like they do. I even raised...

I have a Toro Time Master we use it almost daily although we probably do not use a tank of gas a week in it. We use it for small spots inside of a few small fenced areas parking lot islands ect. We have had to replace the idler rollers several times in the year we have run it. We have broken...

Serviced both Tiger Cats today getting ready to stretch them out next week. Changed oil and oil filter on both and both air filters on both. We are going to be pretty much loaded and are looking forward to being wide open. Hope the rest of you guys are looking forward to a big year. It is about...

Hey guys, been a while since I was on here. Question for you all is this. How many of you guys are flying drones? I bought a very small inexpensive one about a year ago. I was hard to fly because if there was any breeze at all it was almost uncontrollable. I have wanted one for a very long...

Built this box on my lawn trailer to get up leaves. Finished it today and tried it out. Seemed to work great.

A couple of years ago I bought a 110 volt wire welder from Tractor Supply. JobSmart 125 Amp Fluxcore Welder - For Life Out Here It has done a good job for me. I would buy another one if something happened to the one I have. A week or so ago I ordered a 110 volt Plasma cutter from Northern...

I am looking forward to Pinestraw season. This year I am gathering materials to build a new and improved baler. It looks like we have maybe two more weeks of grass and then I can go to work on my baler in ernest. I will post pictures when I get started.

Some of you guys on here I think have run Scag mowers for some years now. I bought my first one in the summer of 2014. Then bought my second one this Summer 2015. I am strongly am considering buying a third in 2016. Both of the mowers that I bought are 52" Tiger Cats with 22 hp Kawasaki motors...

Do any of you have any EXPERIENCE with one of these things? Agri-Fab Mow-N-Vac Lawn Vacuum - For Life Out Here I am hunting a cheap way to remove large amounts of leaves at a cheap price. I looked at one today. I think if I get one I will have to find something to pull it as well. According to...

Today we changed the pump belt on one of my Tiger Cats. It was the first time I have changed this belt. The machine has approximately 600 hours on it. It was obvious that it was getting in bad shape. I was amazed at how fast we were able to change it. Again I am impressed with my Tiger Cat Mowers.

We change blades on two Tiger Cats daily. Some times more than once depending on the day and grass......... We change them with a cordless impact and a floor Jack. On a few occasions we have had a blade that we can not remove. Impact won't break it loose. Cheater bar on a socket with a wrench...

This log was not visible. Had run over it numerous times cutting grass in the yard it was in. I was riding along cutting grass when suddenly my mower stopped. I disengaged blades and restarted engine. Then backed up to see what I had hit. Mower front end started raising off the ground. This log...

Bought a 280 last summer. It ran great for a while but then got to a point that it just bogged and would not rev up. I took it back to the dealer. They replaced the carburetor two different times. They worked on it numerous times. It would run great for a short time then go back to doing the...

Bought a new FS 70 trimmer Saturday it ran Monday and about an hour Tuesday and the motor locked up on it. Shop said it was a bearing on the crank. The old reliable FS 70 we have been running since the spring of 2013 had the muffler come off. This afternoon I realized the bolts are broken off...

Just bought another FS 70 trimmer. I bought one in the spring of 2013 and it is still going strong. Only major thing done to it was I put a clutch in it this year. My crew loves the old one for the most part better than the Echos. I guess everybody has their preferences for what ever reasons...

Widgeudidgu. Used in a sentence. You didn't bring yore jumper cables widgeudidgu?

Every where I go I hear this debate concerning Ethenol verses non Ethenol gas. I went for a period of time that I would only run non-Ethenol gas in my equipment. As much as we run it got to be a pain to keep gas plus the extra cost involved. I had experienced problems a couple of times trying...

Bought a new Tiger Cat with the Kawasaki motor in April. It has around 250 hours on it and started blowing the charging fuse this week. It might blow two or more times a day or not at all. I thought it was just a voltage regulator but the shop says bring it in they feel like it might be a...

Ever wonder what an aluminum baseball bat looks like when it is run over by a zero turn.

I have seen this done before. A guy in my neighborhood had one one time that he did this with. http://youtu.be/3tNVOhtvPEw

Any of you have any experience with the Scag Cheetah mowers? They advertise speeds up to 16 MPH.

A few weeks ago I stuck two pieces of electric fence wire in the side wall on one of the rear ties on my newest Scag Tigercat. It was mid afternoon on Friday and I did not have any plugs on the truck so I took it to the nearest tire shop. The guy at the tire shop told me that they could not plug...

How many of you guys are working for Safeguard this year? I have not seen nor heard anything concerning them this year on here or in our area.

Yesterday I found a Bush hog 50 tiller. Got it for a good price. Brought it home and tilled some in the garden to check it out. Did a great job. Pulling it behind my 3010 Kubota. "30 hp".

See on here and out in the public on a daily basis guys who are doing commercial work who see where they can save a few dollars on equipment going to big box stores or ordering off line. Here is my inPut on this. First off you are buying a machine that is going to last years. Secondly the...

I bought an Echo PAS 280 a while back. It ran great for a short while. Very strong. Then it started bogging down instead of revving up. I carried it to the shop. The mechanic rebuilt the carburetor but very shortly it started doing the same thing again. They then replaced the carburetor. Same...

You guys that cut a lot. How much do you bid per acre on larger properties? Say 4 acres or more.

Do any of you guys use the app called Planimeter to determine the size of a property you are bidding on? I have used it for close to a year and a couple of times it has helped me out a lot because a client has told me a property was actually smaller than it really was. When we cut acres of...

I know that there are probably as many threads on here on this subject as any other. I also know many people have differing opinions. We normally see blades run about 6 to 7 hours before they are really not cutting any more. I bought a new Scag Tiger Cat and it has a little over 7 hours on it...

Does anybody know where I might be able to find the statistics on a Tiger Cat? I am not sure if that is the proper name for it or not but some machine builders can tell you the average amount of time that every component on one of their machines will normally last.

High chance of rain every day this week. Need the rain. Need to run 8 to 10 hrs a day for the rest of the week.

I am trading in ZD326 Kubota and purchasing a new Tiger Cat Scag. Looking forward to this addition to our fleet. We have been running a Tiger Cat for several months and believe it to be one of the better options available to us in the area we live in and for the properties we manage.

Lost a foreclosure. It was a very very nice house in the country on a large lot. :) realtor told me the bank had donated it to a wounded warrior. Did not mind losing it at all if I see him I might give him some cuts to go with the house.

We picked up some new properties today. One of those is a tad over 4 acres. We are going to hit that one early in the AM. We are saying new work daily now.

This is rather lengthy I understand. Maybe it is informative to somebody reading it. We started up as a lawn service the first week of August in 2012. It was something I had looked at for several years off and on. As a kid I had always had some yards and honestly all of my life I had thought...

I needed another mower to add to our business last summer. I have been a die hard Kubota man. I was not interested in anything else. The dealer offered me a Scag to demonstrate. Told me to load it on the trailer and run it a week. I picked it up and ran it. Needless to day I bought one and...

Last year I passed on a complete zone with Safeguard. It was probably not a good decision but the distance was so large and I did not have the experience in that type business to jump on it. I guess my lack of knowledge as well kept me from being able to communicate with the recruiter. She kept...

We have used one now for two winters on one of our contract properties and it does an excellent job. The one we run came from a Pawn Shop and looked brand new but is several years old. It has a Tecumseh Motor on it.