Search results

Hustler X-ONE with Kawasaki FX850V engine with 6 hours.Starts up fine , turn blades on and after 10 minutes of cutting the engine starts spuddering so I turn pto off ,pull choke and eventually it will even out again.As long as no load is on it it runs great but put a load on it and it skips.I...

When i engage the PTO and starts cutting grass the blades slow down as if belt is slipping .I replaced belt and pto clutch and same thing.If the pto wasnt getting enough voltage would it slow down the blades? This Kawasaki engine is on a hustler Z model 926923.any help is appreciated. Oh and it...

a friend brought this hustler model 926923 with serial 03120927 to me and ask could i repair the oil leaks coming from the hydro's. Well like a true freind I said yes. So I ordered 2 seal kits for the pumps and put them in just like instructions said. And put them back on bled air out of system...

I orederd seals for both hydro pumps.I removed the pumps on at the time and replaced the trunion seal and the lip seal.i reinstalled neverything and put a new filter and 15w40 oil in it.i proceeded to bleed the air out by turning the bypass valve and working the handles back and forth.i then...