Search results

Does anybody else tap their spark plug to decrease the gap while you’re checking it. I do that and I don’t know where I learned how to do it or if I made it up. I very lightly tap it on my work bench.

I hope it’s not the wire harness. That happened to me. It’s a pain to find and replace the bad one. Mine was one for the stator.

OK I just did the procedure again and then took it out for a little spin and it’s fine. Must’ve just been some trapped air in there when I first did it and when it bubbled out it foam up there is zero foam in there now.

I’m going to do Thanks, im going to do the procedure again to b sure.

Hey thanks much! Sure hope u r correct.

I’ve just changed my hydraulic fluid, (which in a hustler is oil and I used the oil my dealer told me to for my mower) and I also changed the filter. I have done this many times before and never really noticed any foaming . Maybe I did not follow the procedure exactly. ( ie messed up a step)...

Hey thanks! How do I find you on messenger?

Thank you but that did not work.

Can anyone please tell me how to reduce the size of the file for my pictures so that I can post them from my phone.

Says pic to large🤷‍♂️

I Just finished redoing the drain hose. I Used 1 ft of hose and reused the engine side nipple/plug drain and made one. I had to install the engine side 1st then put the hose on it. Zip tied to the body. Did not have to lift the engine No leaks sad so far.

The way I did it. 15 minutes. They call for 2 hours Lifting motor to do it. It did take me a sleepless night to come up with an idea. I thought I’d try it in the morning and it worked.

So I’m wondering why all the shops are saying you have to lift engine to replace this oil drain on my mower. What I did was just cut all rubber away and use a thin wall socket on it and I removed it. I guess they just like getting the work or are following some guideline from manufacturer. Saved...

I cannot believe what I did and it worked. I thought I’d try it. I ground down one of my cheap old sockets and was able to get it on the drain hose nut after cutting interference out of the way. It came off!! No lifting engine. The hustler replacement part for the piece of crap that came on it...

Thank you very much. I guess you said that because there is NO other way to get it off. If I could get it off would be easy to add the new one that extends out. So the hose does not even have a metal nipple or anything sticking out to try and get ahold of. If I try Anything else I will just mess...

Test

I know u have much better things to do than answer my questions and want you to know I appreciate it. I hate paying someone to do something I may be able do.

Ok. Thanks. How about underneath, the pulley's etc. Boy glad I had the muffler off about 3 years ago. Hope not fused to manifold again.

Thanks much for help. Do I have to remove the exsaust. Do I have to remove the pulleys? How much comes off to get to engine bolts.

Crap! I am the original owner. It came with the flexible one. I’d like to install the one you showed. Can you give me any help. Maybe best to pay someone. 🙄

Drain hose replace on 2004 hustler 60 inch super z model 927038. With sideways Kohler engine. I need to replace the drain hose and I was wondering if anybody has a link to a video on how to do it. It looks like you have to lift the engine up to get the failed one off. What a horrible design. I...

Can I safely engage my PTO on my hustler super Z with the blades off? I have occasion to want to do this. Will it harm any component?