Search results

I just use soap and water. Cheap, non-toxic, and doesn't damage parts/plastic/rubber/paint.

I just use the cheapo hand pump from Walmart for all my fuel and oil pumping needs (mower, motorcycles, cars, boats). https://www.walmart.com/ip/HyperTough-Multi-Use-Pump-Universal-36200WD/345121918

This is exactly what happened to my B&S 25HP. Those intake push-rods are designed to fail if anything goes wrong like valves too tight.

A proper mulching kit will have walls and ramps under the deck around each blade to direct the grass back in to the blades along with also blocking the discharge. You might not be able to get one for that deck, I don't know. Just blocking the discharge is not enough and will cause problems like...

I checked the other head and the lash is off. I don't know by how much but a 0.008 feeler fits easily so really loose. I took out the rod on this side and it looks fine. One thing I noticed is that the oil under the valve cover is not the same oil in the motor. The motor oil is fresh and clear...

I have a Scotts S2546 mower with the B&S 25HP V-twin Intek... It was running fine one day, then the next it was running on one cylinder. Found no compression on the bad cylinder, pulled the valve cover to find the intake push-rod bent and floating around in there. Now I can replace the push-rod...