Search results

Results 1 to 50 of 500
  1. A

    Kohler KT726 oil filter, full size option?

    The funny part is that people will flock to a (bulk) sale offer and barely ever consider the quality of these "bargain" items. I call it "the buy three to get one that works strategy". Now, the numbers have changed to 4 or 5 in a bundle to get one that might work.
  2. A

    1999-2000 Tecumseh OHV 17.5hp in Huskee 42” Tractor Supply Mower

    If you are using Parts Tree for a year model reference don't expect it to be accurate. As for the engine label, that will give the truth most of the time for any parts related to the engine.
  3. A

    Hustler New Front Tyres

    Hi S., Have you considered solid airless tires already mounted on the rims? They are making them now for many models. You will need your spindle width and axle diameter measurement in addition to the tire size.
  4. A

    Briggs starter issues grind and locking

    Hello M., Now take the old starter apart and analyze the wear damage. It will give you a better understanding of the design. I can say from experience that the armature shaft bushings on top and bottom are worn out, and the armature can be wobbled back and forth
  5. A

    Kohler KT726 oil filter, full size option?

    Hello H., Many brands in recent years have shifted to outsourcing the bulk filter canisters from cheap sources and then having their paint and graphics applied to them. I have been sticking with OE filters or NAPA gold and have not had any issues. Ive cut open quite a few of the other brands...
  6. A

    Bad fan in 2008 Super Z diesel

    Pull the fan assembly off and inspect the motor for an ID label. The fan motor was made by a supplier and not Hustler
  7. A

    Dual gas tank - bypass valve

    My understanding is that most equipment in recent years has been using tank vapor emissions systems and the open-air vented gas caps are a thing of the past.
  8. A

    New member

    Hello S., I was not dressing you down personally, just stating the situation.
  9. A

    Kohler KT726 oil filter, full size option?

    Hello I., Glad to hear that. My advice is to stay away from cheap generic "white box" oil filters.
  10. A

    New member

    Don't make duplicate posts. It creates clutter and confusion. We do not need either one. Make one post and wait, someone will reply eventually. This is not AI garbage.
  11. A

    Dual gas tank - bypass valve

    I would say, use a T fitting, but place a manual shutoff valve in each fuel tank line. Fuel expands and contracts with temperature change and this will eventually place too much stress on the carburetor float and needle. The anti-backfire solenoid does not perfectly seal and prevent fuel from...
  12. A

    Kohler KT726 oil filter, full size option?

    Kohler 12-050-2 should be the longer one. If there is room to install it, I would say use it. A warning about the appearance of the canister size is not to assume that it has more or better filtering media than the shorter version. Aftermarket filters are bad about using long canisters, but...
  13. A

    Winter Storage: Drain the Fuel or Use Stabilizer?

    Another very good stabilizer I've been using in customer machines and a couple of mine that sit a little too much is a product called Ethanol Shield. Chickanic has a very good video about this product. The trouble with any fuel is that if it has air space in the tank or a gas can, condensation...
  14. A

    New to me Briggs 8 hp on a Troy Horse Tiller

    From what I can tell, someone went to the trouble of removing the riveted plate on the starter head. This suggest it was "acquired" by nefarious means in the past. It is a basic 8HP flat head horizontal crankshaft engine design. Possibly mid-late 90's just before B&S switched to the OHV designs.
  15. A

    New to the Board

    Hello B., I thought we are a forum, not a "board". LOL If you need help with any problems, please provide the chassis and engine product label information. Year models seldom have any bearing on finding needed information on most equipment.
  16. A

    Parts source requested

    Hello S., Being that this is an aluminum block, I would say it is a basic 6 cubic inch engine and rated at 3hp. The earlier cast iron B&S engine offering did have a 2-hp and even a 1-hp with a foot crank start mechanism. I am digging around for my quick chart parts reference book from the 70s...
  17. A

    Briggs and Stratton Generator gas cap

    That steel tank with the "water puddle" recess around the fill opening was one of B&S worst designs. The cap that ILENGINE shows should work fine and get rid of the garbage vent hose. Hopefully the tank on this thing is not rusted badly. The B&S models with nylon tanks were much better but...
  18. A

    Winter Storage: Drain the Fuel or Use Stabilizer?

    Hello D., I recommend you fill the tanks (as full as possible) with non-ethanol fuel along with a little bit of 2-stroke oil to help keep the carburetors & fuel system protected. Run them for a few minutes and then let them sleep until spring. In the past I learned not to let fuel tanks on...
  19. A

    What has happened to my Kohler ?

    I suspect soon that engineers will do away with traditional dip sticks and have owners rely solely on an electronic oil level sensor. Great! more electronics to fail at a higher cost to manufacture.
  20. A

    Eaton 778 oil change

    Oil change in a gearbox? What's the rationale behind that? The industry is making everything with "lifetime" lubricants now and practically no service capability. What is lifetime you ask? Answer? Until it breaks and then you must go buy another new machine.
  21. A

    New Member

    Welcome to the forum.
  22. A

    X125 starting problem

    When valve lash becomes too much due to wear and tear, the compression relief become less effective. When that happens, the starter has to strain to spin the engine because it is fighting higher than normal cranking compression.
  23. A

    X125 starting problem

    Sounds like it is time to adjust the valves. What is the product information on the engine?
  24. A

    Briggs starter issues grind and locking

    The ring gear on this design does not wear the teeth like some designs do. Basically, you are trying to replace broken parts with worn out parts and it is just not working. The starter in the picture has everything that moves simply worn out. Trying to get by using salvage/used parts will...
  25. A

    2011 JD Z425--54-inch Zero turn. sale it or part it out?

    Hello H., The Z425 has been a popular model for years. The 54" deck makes it more appealing to cut larger properties faster. I recommend selling it has is and don't part it out. Good Luck in your venture.
  26. A

    Hi all

    If you are using canned pre-mix fuel, that is where I would look. I have had a to dump a lot of that stuff out of customer machines and use my own fresh mix several times.
  27. A

    2011 JD Z425--54-inch Zero turn. sale it or part it out?

    Hello H., Heck, replace the head and put new push rods in it. The valve guides have slowly moved up in the head casting and finally jammed the valves over the years. This was common back when the engines were produced years ago. Machines that were abused and neglected were the quickest to fail...
  28. A

    What has happened to my Kohler ?

    Hello Scrapman, Checking for spark outside of the cylinder is only a "rough guess" that the plug will fire when under compression. I've done that countless times in the past also, but it is where it can trick a person. The flash bulb spark testers will also trick you because there is no...
  29. A

    What has happened to my Kohler ?

    Hello Scrapman, On the optimistic side, this may simply be a failed ignition coil on one cylinder. When a cylinder is not producing power, it becomes a useless burden on the working cylinder and just pumps air through. This will create the odd vapor oiling problem you mentioned. The engine...
  30. A

    Briggs starter issues grind and locking

    The pictures shows there is no problem with the flywheel gear teeth. The Bendix gear is fully extended but not even close to contacting the flywheel gear. The gear on the starter gear moves up and down, not side to side. Are you sure the starter is the correct one and bolted on tight? This does...
  31. A

    Lawn Boy 5254 body crack - split on lower part

    Along with that, the blade will need to be replaced, but remove the spark plug and turn the blade by hand to check the crankshaft for being bent and not turning in a true centerline. Along with that, the flywheel has likely sheared the keyway area that keeps it in proper ignition timing. As...
  32. A

    Briggs and Stratton Generator gas cap

    If the cap has a hose coming out of the top of it, it is likely not original, but a borrowed cap. Many 4-wheeler fuel caps have a vent hose on the top center of them. I have not seen any Briggs and Stratton generators with a vent tube on the top of the cap.
  33. A

    What has happened to my Kohler ?

    Don't pull the carburetor just to see if it will try to run on carb spray. Just spray it directly into the carburetor opening lightly while the choke is open. See if will try to fire up and run for a few seconds. Having an air cleaner in place is not important to see if it will try to fire up...
  34. A

    Oil change mess, suggestions?

    I think the confusion is in the mixed information online. Kohler engine division is now "Rehlko". Kohler product made a simple spelling change to the name. Kohler products international wanted to split off their brand lines from their home and plumbing hardware division. The Rehlko engines...
  35. A

    LT1000

    Hello E., Around my area I keep getting repeat issues with people using store bought canned pre-mix fuel in their two strokes. I have had to dump this stuff out several times and then purge the carburetor and add my own fresh mix that I keep on hand. Most of the 2-stroke carburetors I end up...
  36. A

    1999-2000 Tecumseh OHV 17.5hp in Huskee 42” Tractor Supply Mower

    It would help greatly if you could give us the engine product label information but is likely gone or very worn down at this age. Don't mix new aftermarket carburetor parts with the original. Fix the original carburetor if at all possible. There are several You Tube videos that go over these...
  37. A

    New Cam-Release on 19 hp B&S Intek

    Hello Bob, Unfortunately, the compression release mechanisms are not that robust on purpose. The light design makes sure there is not excessive rotational force when the camshaft is turning at high RPM. A camshaft rotates at half the speed of the crankshaft. The purpose of the compression...
  38. A

    Oil change mess, suggestions?

    Hello M., That a cool idea if you can keep the Ziplock bag close enough when the filter seal is broken loose. I also like the old "cut to fit" oil bottle trick, it works great for conventional riders with easy filter access. My Cub Cadet Z-Force 48 rider has barely enough space to access the...
  39. A

    Goes full throttle at start

    As much as I hate to say this, it may be time for a full overhaul with a rebore, new piston, rings, gaskets and governor/ oil slinger. The trouble is that at this age the parts will be practically non-existent. Along with that, practically no machine shop would even consider the rebore without...
  40. A

    Goes full throttle at start

    Hello D., The oil sump on this thing has also likely collected large amounts of micro-particles of sludge buildup in the sump at this age. There are several cavities in the sump where this stuff will just lay in there from the day the engine began running.
  41. A

    Starter pinion teeth, 14 vs 16?

    It is a matter of the ring gear tooth design that will allow with number of starter gear teeth to function. Yes, it is about starter torque and the size of the engine. Many engines use the same basic starter. If you took a 16 tooth oof that is what you replace it with. Engineers and...
  42. A

    Goes full throttle at start

    The engine code shows it is a '78-year model engine so it has seen better days. I started in a small engine shop part- time while in high school back in 1979. Things have changed a lot since then.
  43. A

    Hello from central Ohio

    Hello G., Glad to have you. If you need help with any equipment, make sure you provide both the chassis label information (not the hood stickers) along with the engine label information or number stamped into one of the valve covers. We have a lot of experience folks here, but we don't have...
  44. A

    John Deere lawn tractor 285

    Hello N., Whenever you post, be sure to add the product label information on the chassis and the product label information on the engine. JD does not build the engines for their lawn equipment. The more information you provide the better we can help you without taking wild guesses.
  45. A

    Cold weather starting

    If it is a Walmart "never start" they are not made to last hardly a year without a battery maintainer constantly connected. As M said take the battery terminals off and clean the really good. Corrosion on terminals is a constant problem with rider equipment.
  46. A

    Goes full throttle at start

    Hello D. Have you ever seen how slow SAE 30 pours out when cold? The same thing is happening inside the engine and an additive like Lucas just makes it flow slower the colder it gets. I quit using straight SAE 30 years ago except for gearboxes and older 50's tractor hydraulics. I also used to...
  47. A

    NIKKI CARBURETOR HELP

    What better way to keep people from repairing existing equipment? Overprice the parts and put them on eternal backorder. If you are lucky after 3-weeks, they will just cancel your order and send you searching all over again.
  48. A

    It's me...

    Hello P., Are you human, or a search bot?
  49. A

    Briggs and Stratton Generator gas cap

    Hello N., That means we are just guessing?
  50. A

    Goes full throttle at start

    Hello D., Remove the air cleaner and take a couple of pictures of the carburetor linkage for us to review. (My mind's eye, needs a little help to focus) If I remember correctly, this is a larger flathead engine that had an internal mechanical governor driven off of the cam gear. It is rare...
Back
Top