Search results

I know this is obviously a Hustler forum, so I anticipate an obvious bias towards Hustler products, however I am purchasing a used mower, I have narrowed it down to a 2013 Hustler Fastrak 48” with the Kawasaki FS651V or a 2010 John Deere Z425 (23 HP). Both are priced similarly, with around the...

I believe you are correct, I have that bolt, what I don’t have (and cannot seem to find anywhere on any parts diagram or website) is the silver bracket in the photo, the bracket that actually connects the clutch to that bolt.

I appreciate the reply, but unless I’m missing something, in the manual it just shows it all as “clutch assembly” and doesn’t show the anti-rotation bracket. But now that I’m looking at that, I didn’t have insert a stock key, is it possible that could be my issue?

Just purchased a used 2013 Bad Boy ZT Elite 60” I ended up having to replace the clutch (Ogura 179334) however, when I go to engage the blades, the whole clutch itself spins (pulling the wires out), after doing some research I’ve discovered I probably need an “anti rotation bracket” to keep...

Just for future reference in case any one else encounters this problem, this is the diagram the tech at Bad Boy sent me, and he informed me that you do have to remove the idler arm in order to get the belt to route the way it is supposed to go. This is completely different from everything I’ve...

I believe it is. My issue is that on all of these diagrams it shows the arm that the tensioner pulley is on, having the bolt attached to the side of the engine pulley, on my model the arm is attached to a bolt directly in front of the engine pulley. So it seems impossible to be able to route the...

That would be appreciated! It’s a Bad Boy 2012/2013 60” ZT ELITE SN# BZE6027KO04131174 every manual I check has the exact same routing decal for every Bad Boy mower ever made, and that can’t be right.

I have recently acquired a 2013 60” Bad Boy ZT Elite, the old pump belt was shredded so I had to cut it to get it off. I have already removed the tensioner spring, my problem is trying to route the new belt. All the routing decals/diagrams I can find from Bad Boy do not match my mower. Has...