Search results

Does anyone know why these toro self propelled time master transmission fail to drive. I've checked the cable and cable cam, they seem fine. The cable pulls the transmission arm which activates the transmission to turn the wheels, and it does turn, but, the drive strength/power is weak and so...

Model. Type. Code. 21B807. 0290 E1. 0512227A. My engine has a miss. I replaced carb, spark, adjusted valves. It runs but misses a beat every twenty or thirty seconds. Like it's starved for fuel for half a second. I've replaced the carb twice, cleaning and checking on the way. My...

Should I replace the cam wheel? Engine 4 yrs old, used commercial 15-20hrs/week. Hard to pull, valves were recently adjusted by stihl dealer. And replaced air and fuel filter. Maybe compression release not working?

I have a ride on mower, poulan pro. The manual clutch is engaging, although it is old, and makes a rough sound when I pull on the belt. My issue is when I get to some longer grass the blades stop spinning. When I disengage and re-engage the clutch on smooth ground the blades take a bit to start...

I am trying to find a voltage regulator for my riding mower. I have a Briggs 13.5hp ic engine. I have added photos of regulator with plugs. Finding the plug is the hard bit. I have added a pic, but I'm not going to pay $50 for it. Otherwise I'll just rig up my own. I have tried a regulator from...

Have a Briggs DOV engine on a Victa. This thing won't start. I've cleaned the carb with ultra sonic cleaner. Replaced spark plug. Re gaped the coil thingy, adjusted valve lash to spec. Replaced air filter. The only time I can get this to start is with a spray of carb cleaner. The mower runs...

"532 18 03-54" Clutch Assembly. Poulan pro, Model No. PP16H36RB (96061015701). Does anyone have the parts diagram for this clutch assembly? My one I bought was in pieces, and I am trying to put it back together.

Does anyone have one of these plastic rings around the intake to the carb. I took mine off and replaced it with a o ring. No more air leak. Mower running perfect.

My mower wants to die when at idle. The thing is when I tip it back the idle smooths out to normal. Have replaced carburetor still da same problem. It will idle smooth then all of a sudden die down like there is no air. And then idle back up again. Is my fuel tank blocked? This is really weird.

My time Master mower cuts high. At the lowest setting the chassis rubs the ground. And grass hieght is about an inch and a quarter. How can I lower the blade hieght without compromising performance? I thought about putting a shim on the blade and then re-attaching it so the blade is then level...