Search results

While I was mowing my lawn on a flat not-bumpy surface with my ZT254, the blades stopped turning. The blade switch was still up. The mower continued running as normal but the blades would not engage. I traced the wiring to the clutch and there's no sign of wear. The wiring connector for the...

Feeling stupid and hoping someone has seen this. I bought an OEM carb for my 440 Husqvarna chainsaw and found that my 21 tooth spline jet adjustment tool is too small to fit on jet spline. Thought it was a bad carb so I sent it back and bought a second carb from a different dealer and had the...

One front wheel bushing on my Husqvarna Z254 54" Zero Turn mover is shot. First wheel problem, 10 years old, grease all zircs annually. Looking on Amazon, I can buy replacement bushings or they have a kit that replaces the bushings with bearings and a 304 SS shaft insert. I prefer bearings to...

My neighbor's nearly new Cub Cadet ZT142 has an issue where the Main Drive Idler Spring keeps falling off. The belt looks like new, has no issues and, watching it running after reassembly, the belt runs smoothly across the pulleys while the idler pulls constant non-hopping tension. I flipped...

My Husqvarna Z254 zero turn, although drivable, steers differently on the left side versus the right. Left has minimal steering impact. The linkages and belt look good. Am I missing a key maintenance function like hydraulic fluid or an adjustment screw? Feeling dumb! Thanks for any advice.

I messed up and, being used to my 2-cycle motors, didn't check the oil on my Makita 4-stroke backpack blower and locked it up. Stupid, I know! Tore it down and have it ready to go again but have no idea what the correct setting is for the valve timing. It's a gear drive for the crank...