Search results

type 0035-01 code 74072303 # 80332 it will start and run for a few seconds. will not accelerate. I fell that i have a fuel problem. check fuel tank it was clean, replaced fuel line old line crack. Removed carb disassembled found old gas residue and some dirt. Rebuilt carb using a b+s carb kit...

unable to find clutch brake interlock switch and pto switch these may be the part #103480 2 prong the other switch is 98-2392 or 109327 4 prong switch, these numbers came from a small shop looking them up but unable to find them.

thank you Star Teck this a great help.

I was giving a work horse lawn tractor year and model unknow all information on the sticker on the side is unreadable. It's a GT1600 8 speed with 16hp B-S twin. Iam having trouble getting power to the starter solenoid, the three safety switch test out ok, there is 12volts at the ignition...

thank you star tech, this was a great help.

thank you to all that gave me information. LTX1050kw model 13wi93ap010 built date 5/20/12 if shaft is held in by a snap ring under the seal can it be replaced with out the transmission being disassembled? I know the unit must be removed.

2012 cub cadet hydrostat with tuff torq transmission , can the input shaft be replaced? bolt holding fan broke off, unable to drill out.

I retired about 3 years ago after 48 years as a Ford/Lincoln Mercury tech. Now I spend my time fixing other things. I have a neighbor with a 1999 Exmark Lazer Z, model LZ22LKA604 and serial #204513 and engine #FD661D003939. It is a Kawasaki V twin, water cooled. Over the years I have...

I belong to a sportsman club with this tractor, the belt needs to be replaced. All information I find on line say this is a very difficult job there is a plate under the pulley, some say to pull motor other all steering linkage Is there any other procedures to help with belt replacement? I'm...

thank you for your help. replaced coil now have spark.

50 cc pp5020av test for spark with tester no spark, check with known good plug no spark, removed kill wire no spark, flywheel clean gap .014 magnets strong, replace coil with new, no spark. With a possible bad new coil is there something I'm over looking? The coil was from a dealer.