Exmark Jack. - Jack Mount Kit

Thought I would share a neat device that allows me to lift my Exmark high enough to access the blades.
Are used to hoist the front end up with a log chain from the header over my barn door, but this thing is a game changer.

Still prefer a proper lift.

HFT does have a couple. A 300 lb (61523) and a 750lb (63298). Now 750lb one need the H lift part removed as gets in the way electric PTO clutch removals. The only other problem into with 750lb one is that sometimes a pair of 2x8 runners is need for some mowers as the deck does not clear the jack's foot.

Captain Belly said:

Thought I would share a neat device that allows me to lift my Exmark high enough to access the blades.
Are used to hoist the front end up with a log chain from the header over my barn door, but this thing is a game changer.

war the knights

Click to expand...

Wow, that jack mount looks like a real game changer for mower maintenance

Weird. My Exmark Radius came from the factory with the jack socket already welded on. I bought the bulldog jack for around $60. I assumed it was standard across all models.

A good tip is to remove the jack crank and use a cordless drill. Just make sure the base of the jack is on the ground when removing the crack or the shaft will drop down.