Dentent spring

jacknjill

jacknjill

Member
Joined
Aug 6, 2026
Messages
18
I have a Briggs quantum series 675 model 126T02-0290-B1. There is two springs the longer one goes around the throttle linkage I believe, the smaller I think is called the dentent spring. Does anyone have a picture of where and how it hooks up. Greatly appreciated in advance
 
That should be the choke return spring.

Nothing currently around the shop with that setup here.
 
Ok. If you by chance you come across a set up like this could you please send me a picture of how it installs. Thanks again
 
Here's what I have
 

Attachments

  • 17873436210366342098407360698092.jpg
    17873436210366342098407360698092.jpg
    644.6 KB · Views: 3
To me that looks like a governor spring. Can you take a couple of pictures showing the top of the carb?
 
This engine is on a Swisher trim-n-mow. I should have stated that sooner my apologies
 
I'm not sure if these sent yet
 

Attachments

  • 17873524252326837513705177460638.jpg
    17873524252326837513705177460638.jpg
    1.5 MB · Views: 4
  • 17873524425561249015681856774249.jpg
    17873524425561249015681856774249.jpg
    1.4 MB · Views: 4
there are many spring configurations on the 6.75 hp 120000 series motors. Many are in the Briggs repair book showing those configurations. This is on a Toro vertical mower engine. No idea whether yours is vertical or horizontal. This one is a 125K02-0189-E1

spring 1.jpg

spring 2.jpg

spring 3.jpg

spring 4.jpg

spring 5.jpg

spring 6.jpg
 
I may be wrong, but I don’t believe that the spring you posted belongs to the engine number you posted. I can’t find it on the IPL for your engine. Are you sure that the spring posted came from your engine? The pictures the Sgkent posted are the governor spring and stop control spring.
 
You must log in or register to reply here.
Back
Top