Zzz's latest activity

Hi P., Please don't mix subjects. Open a separate thread post to discuss portable generator choices.

Those long screws (studs) that hold the carburetor on have a star on the tip that require an E-torx bit to take out. The studs each have...

My photography leaves a little to be desired. The ends of those bolts are six pointed. My first thought is to just grab a hold of them...

Well I started taking off the carburetor and am unfamiliar with the tool that I need to take the bolts off and hold the carburetor on...

Have you ever seen a Arthur Head screwdriver? (very rare, possibly only 4 made from the A head of a typewriter key) The A on the...

Im usually able to grip the heads with Irwin vice grips and get them out that way

For those who don’t know, there are 2 types of 4 sided screwdrivers. One is called a Reed and there other is called a Phillips...

I use one of these...

Post up a picture of the bottom of the carb bowl showing the screws? I suspect you have the JIS (Japan Inbred Screw) type. I use the...

One way to get these screws is take a long solid bit of the appropriate size. Mount the carb in a vise with protection for the carb...

Three things that have bailed me out when I run into this problem with Phillips screws. 1. Make sure you have the right size driver...

Hello P., Hopefully the carburetor has been removed, if not you are fighting a losing battle. A few good strikes with a hammer and a...

Generator unit is about 14 years old Briggs & Stratton Storm responder 8250. Always run clean gas through the unit and use stabilizer...

I have a 2005 Murray riding tractor with a 42 inch cutting deck. I'm wondering if the bagging unit that is out there for the 100 and 200...