Recent content by yawg
-
Y
Toro Z master G3 dies when running, won't crank
I was able to test all the circuits today with the diagram. It was indeed a poor connection on the positive 12V from battery to pin #12. It showed 12V in OFF, but in ON the draw in amps from the other circuits lowered it to 6V. The poor connection was in the white hardness right by the starter...- yawg
- Post #8
- Forum: Small Engine & Mower Repair
-
Y
Toro Z master G3 dies when running, won't crank
This is very helpful, thank you so much! Somehow my print of the owners manual was missing the last few pages with the wiring diagram, tis fixed now thanks to you guys. With those references I'll be able to do some effective wiring checking this weekend. Hoping it won't take to long to find...- yawg
- Post #7
- Forum: Small Engine & Mower Repair
-
Y
Toro Z master G3 dies when running, won't crank
Two wires. I bypassed both switches, no luck, and both showed good when the hour meter did show the interlock, but still no luck. Also I don't believe it would explain why it died running, since the arms are allowed to be in any position while running. Thank you SO MUCH for the wiring diagram...- yawg
- Post #4
- Forum: Small Engine & Mower Repair
-
Y
Toro Z master G3 dies when running, won't crank
I have an older Z master G3 model 74937 which has been great. Except that it dies when it gets around 20F (or -5 Celsius) ambient temp when going into neutral, and won't crank afterwards. Before anyone asks what I can possibly mow in the winder (as I am sure you are wondering!), my wife uses the...- yawg
- Thread
- crank dies toro
- Replies: 8
- Forum: Small Engine & Mower Repair