woodstover's latest activity

Do you mean something like this?

Well I see you are just throwing at it as the seat switch has nothing to do the reverse inhibit working as intended. It is just that you...

You might ought to stop skimming threads and read the whole thread as it is posted in post #8 back on September 20th. Skimming threads...

Verify the tank strainer is not partially clogged, fairly common.

Did you pull the emulson tube out as well and clean all of the holes in it ? The emulson tube is the bit that pokes out into the carb...

unfortunately most people are fairly sefish. They come here with a problem an when they get it solved vanish with not so much as a thank...

I think I understand this, but read below and tell me if this make sense, or I'm not getting it right: If the mower only runs with the...

But the appear to be available in Canada and Europe so my Canadian buddy is getting it for me. Husqvarna and Poulan just doing it to...

Thank you for your response I believe my only choice is to buy a belt shorter than the one it calls for

An oiled plug, rusted in place...... Let that percolate a bit. Meaning they stripped slash cross threaded it.

Now you've gone and done it..... some years ago, I was passing by a Monroe Muffler shop it dawned on me my oil was overdue on the...

did anyone look at the Amazon link I posted? These things are incredible.

All way too complicated - I use a piece of malleable aluminium flashing (replaced lead). Can be purchased from the hardware in a small...

small 22 caliber directly through; but do it in the grass, not a concrete floor ..... 😱

Hi ljb, Pull the plug wires and crank the engine a few times while the drain plug is out, then let it sit and drain a little longer...