woodstover's latest activity
-
woodstover reacted to Tiger Small Engine's post in the thread Convert Ryobi RM300e to Lithium battery with
Like.
A potential firebomb in your garage. I would store it outside under cover away from your house. -
woodstover reacted to Auto Doc's's post in the thread Craftman 5000 Watt Generator hard Starting when Hot with Like.
One thing that comes to mind is fuel percolation in the fuel bowl after shutdown. All that post-shutdown engine heat directly effects...
-
woodstover reacted to Auto Doc's's post in the thread Craftman 5000 Watt Generator hard Starting when Hot with Like.
If it has a low oil switch at the bottom, on the side of the block, unplug it and see if it will start when hot. These switches were...
-
woodstover reacted to Rivets's post in the thread Still trying to get the mower deck right with Like.
Here is the reassembly order I suggest you follow. 1. Admit that I’m smarter than those on this forum who have tried to help me. This...
-
woodstover reacted to farmerdave1954's post in the thread Still trying to get the mower deck right with Like.
Holy cow! I can't believe I just sat here and read through all 9 pages of this thread going back over a week! JimP2014, I do believe...
-
woodstover reacted to MParr's post in the thread Still trying to get the mower deck right with Like.
I've already suggested that he "call the man." Other than that, I'm done.
-
woodstover reacted to Rivets's post in the thread Still trying to get the mower deck right with Like.
Not you for sure. I don’t know why I keep following this thread, but it has gotten so bad I have to warn others not to use anything you...
-
woodstover reacted to MParr's post in the thread Still trying to get the mower deck right with Like.
The only ways that pulley could be tilted is a bent bolt, wallowed out bolt mounting hole or bent mounting bracket. THE END!
-
@GearHead36 I don't know if it was a proven fact or some word of mouth that spread about, with the original reason being trying to...
-
You’ve posted 2 threads with the same problem and have done what experienced techs never do, THROW PARTS AT IT TO SEE WHAT STICKS. As...
-
woodstover reacted to Rivets's post in the thread Still trying to get the mower deck right with Like.
In the video I see two things I don’t like. One, the large idler pulley is at an angle. The idler tensioner arm may be bent. Second...
-
Owners manual states the following: 5. TRANSPORTING 1. Disengage power to attachment(s) when transporting or not in use. 2. Do not tow...
-
Auto Doc, I doubt the OP can access your computer remotely....Try linking a manual on the web or one of the online drives such as Google...
-
Don't just blindly change them, prove where the problem is so you understand better.
-
Hi GBREA, The oil sensor will not even let it start if was connected and bad. Seeing how it is not connected or exists on this engine...