Westmoor63's latest activity

oldntired55, I ended up re-cleaning the nut that holds the fuel bowl with a soft wire. I never saw any debris, but there must have been...

Ilengine and AutoDoc, The flywheel came off with a lever under the flywheel and a few knocks on the crankshaft. Thank you for your...

Auto Doc's, You are correct the flywheel key is partially sheared. The flywheel puller holes are blank, no threads. I pried the flywheel...

Hello, I am working on Craftsman lawn mower 124L02 1307F1 09010758. It takes about 6 pulls to start, and usually backfires and jerks the...

Tiger Small Engine, sgkent, and Star Tech, Berryman is a good idea, leaving the welch plug alone is good advice, and I will pay more...

StarTech, SGKent, and TigerSmall Engine, I learned a lot from your advice. The Berryman sounds better than either. Leaving the welch...

StarTech, I thought I cleaned the nut. But evidently spraying the aerosol did not do what was needed. I just used a soft copper wire...

Hello, I am working on a Craftsman 6hp B/S lawnmower #122K02 0577. It will start on either, but only runs for a few seconds. The mower...