Turbodriven's latest activity

I believe it's a 2018 if it matters. From zero throttle to half throttle the engine is at idle at about 1600 RPMs. From half throttle to...

Both spark plugs look golden brown. No real difference. Both appear healthy. Edit: That is an interesting note about the...

This motor should have hydraulic lifters so valves can't be adjusted. But I'll pull the valve covers off and look for any anomalies...

Which cylinder is the problem? 180 is too high isn't it? 140 is a little low, but very acceptable for an engine with hours on it. Right??

Follow up post. I disconnected the main harness and direct connected 12v to the DSAM and the Solenoid. Motor fired right up with no...

I don't think this is the issue. I've triple cleaned the main engine harness plug and it looks good. However the rest of the harness is...

Yep, thanks. I've got it on my bookmarks already. Invaluable with these motors.

Yeah good point. If feels like the source of the issue is the DSAM since when disconnected the voltage shows right. But maybe it's...

The short video attached should explain it better than I can. Essentially I'm not getting 12v to my fuel shutoff solenoid unless I...

Ah, good point. Won't bog down so easily. Makes sense.

I've got an Ariens Ikon X 52 that came with a 22hp Kohler Courage motor. And I have a 26hp Kohler Courage sitting in my garage. The...

Thanks. That's even more a mystery then. I'm left to wonder if it was replaced with NOS somehow or a full used motor. Probably the...

I just bought a 2018 Arien IkonX 52 and noticed that the Kohler Courage 22 that is on it has a "build date" of 1/31/2006. Anyone know if...