Snapper series 6 1987's latest activity
-
SSnapper series 6 1987 replied to the thread Snapper series 6 Briggs model 191707 type 251501 Having trouble removing drive pulley ..Will do if ever I can get this thing to let go. It's like a Lousiana tick...just burrows in deeper. The information in both Briggs and...
-
SSnapper series 6 1987 reacted to slomo's post in the thread Snapper series 6 Briggs model 191707 type 251501 Having trouble removing drive pulley . with
Like.
Once you get the pulley off the crankshaft, please glob the snot out of the end of the crank with anti-seize goo. Next guy will thank... -
SSnapper series 6 1987 replied to the thread Snapper series 6 Briggs model 191707 type 251501 Having trouble removing drive pulley ..I sure wish I had known about this forum before I started. I have a Briggs and Stratton Service and repair manual (copyright 1992) I got...
-
SSnapper series 6 1987 reacted to ILENGINE's post in the thread Snapper series 6 Briggs model 191707 type 251501 Having trouble removing drive pulley . with Like.
The disc should unscrew from the shaft collar. The shaft collar is held on by if I remember correctly 2 set screws, and then should...
-
SSnapper series 6 1987 reacted to slomo's post in the thread Snapper series 6 Briggs model 191707 type 251501 Having trouble removing drive pulley . with Like.
Guessing she is rusted onto the crankshaft. Two set screws are all I know about securing it on the crank. I couldn't get mine off...
-
SSnapper series 6 1987 reacted to hlw49's post in the thread Snapper series 6 Briggs model 191707 type 251501 Having trouble removing drive pulley . with Like.
Snapper had a special puller to remove the drive disc off the engine. Use to have one but can't find it now
-
SSnapper series 6 1987 reacted to Its Me's post in the thread Snapper series 6 Briggs model 191707 type 251501 Having trouble removing drive pulley . with Like.
Snapper, I still have the puller, and it screws into the Disk and a solid thread bolt contacts the crankshaft and pushes the adaptor...
-
SSnapper series 6 1987 replied to the thread Snapper series 6 Briggs model 191707 type 251501 Having trouble removing drive pulley ..Thank you for the tips. If the pulley is not screwed onto the shaft that makes things easier. I've been soaking it and every now and...
-
SSnapper series 6 1987 replied to the thread Snapper series 6 Briggs model 191707 type 251501 Having trouble removing drive pulley ..The two set screws came out so easily I thought I had it made. Been trying all the usual sprays (ATF, WD 40 etc) heated it up and tried...
-
SSnapper series 6 1987 posted the thread Snapper series 6 Briggs model 191707 type 251501 Having trouble removing drive pulley . in Snapper.Trying to remove the drive pulley and wondering if the pulley has to be unscrewed or just removed by heat and tapping. There are threads...