slomo's latest activity

Why did you replace the parts? For this problem or just doing a tuen-up? If the problem is new, start with the easiest item, the spark...

Take gas tank out, clean thoroughly, replace all fuel lines. Run with tank cap off. If problem recurs, ypu do not have a fuel delivery...

How fast the engine is running to engage the PTO is another topic that many people disagree with. I have been hitting the PTO on my Scag...

Trick is a non hardening sealant. This stuff is great if YOU are the guy removing the cover next time. For valve covers and oil pans...

How do you do it without RTV?

Seems that some folks went off on a tangent about spindles but missed the fact that you are trying to engage the deck at idle or near...

I have one

No, but when I pull it out to mow this week, I will definitely check that. Thank you.

Yes sir, new doesn't mean anything these days. I'll try to clean the original carb. Thanks for the input.

These both require testing. New doesn't mean new anymore. Either lack of fuel or ignition is failing slash weak. Air, fuel, spark at...

Check the valves yearly for a good runner. Only takes about 3 minutes. I don't use RTV that's why so fast. RTV used you will be out...

How many of those, are still in use?

Get an oil extractor. Forget all the valves mess (literally) and tipping pushers over. Forget crawling under the car.

Most circuits require a ground to pass current. Run a heavy gauge cable from reg to batt - terminal direct.

Yes because the regulator has to have a return ground path.