slomo's latest activity
-
Sslomo reacted to sgkent's post in the thread Husqvarna will not start but will crank sometime with
Like.
been there. One of my friends chased a starter problem on a car he was restoring. Days. The cause turned out to be the bell housing had... -
Sslomo replied to the thread Husqvarna will not start but will crank sometime.Most overlooked cable ever. Glad you got her running.
-
Sslomo reacted to afbryant1964's post in the thread Husqvarna will not start but will crank sometime with Like.
Hi again. you guys called it. It was a bad ground. GRRRR!It had me about to pull my little bit of hair out. Thanks again for the replies
-
Sslomo replied to the thread i am working on a Ferris 5900536 model number. unit will not start, i mean nothing. no power. all safety switch's replaced. Ignition switch replaced,.OP ghosted us all LOL.
-
Sslomo replied to the thread Riding mower runs for about 20 mins then stops.Other guys have good suggestions. Normally when time comes into play, mower dies after 15 mins, trash in the fuel tank. Could be a...
-
Sslomo reacted to MParr's post in the thread Riding mower runs for about 20 mins then stops with Like.
How old is this mower? Fuel lines deteriorate with age. They might look good on the outside but can be flaking off on the inside. Trash...
-
Sslomo reacted to Auto Doc's's post in the thread Riding mower runs for about 20 mins then stops with Like.
The next possibility is debris floating around in the fuel tank and blocking the fuel pickup tube. That or the fuel shutoff solenoid on...
-
Sslomo replied to the thread Trimmer started only after yanking on it with throttle and choke open.Definitely not Scamazon nor Fleabay. Several mower parts places on the innerscreen.
-
Sslomo replied to the thread Trimmer started only after yanking on it with throttle and choke open.Any carb that old the diaphragm probably turned stiff. Full OEM carb rebuild or replace with OEM. Most 2 smoke equipment actually...
-
Sslomo replied to the thread Everybody keeps sending me the wrong valve seal! (590534).What a country..... LOL Freaking genius with the paint.
-
Sslomo reacted to l008com's post in the thread Everybody keeps sending me the wrong valve seal! (590534) with Like.
That was me! With the paint! But those were numbers engraved in the metal cover of a yard vac motor. The numbers for this motor are...
-
Sslomo replied to the thread Briggs & Stratton OHV Plastic Engine No Compression.Not like Briggs engines, well, guess they do make racing engines. Going to say they are not high rpm engines with any form of durable...
-
Sslomo replied to the thread Everybody keeps sending me the wrong valve seal! (590534).Double check your engine numbers. Something has to be off. On some engines, I have to take a red oily shop rag and wipe the numbers...
-
Sslomo reacted to sgkent's post in the thread Everybody keeps sending me the wrong valve seal! (590534) with Like.
normally a valve seal sits over the guide, and it is pressed / tapped on with a tubular tool so not to damage it installing it. The...
-
Sslomo reacted to Tpieman22's post in the thread 19 horse Briggs & Stratton will only run with choke half on with Like.
I am finally getting back to finishing this thread and thank u for all your suggestions. It turned out to be a sticky float needle...