slomo's latest activity

I would pay to watch him do that....🤔

To check to see if the valves are seating properly put the spark plug back in and pour some liquid in the head and see if they seal

You ought to watch some YouTube videos of Pakistanis rebuilding engines.

The Bore looks to be in very good condition. Be sure Valve Guide clearance is adequate. What gauge were you using to check...

Check carb after-fire solenoid.

I had a problem where my Z345 would not crank. Battery voltage was full and the hour meter was working. Day one I gave up. Read on-line...

Check the seat safety switch wiring carefully, I have seen several that rubbed through.

My usage with Air-8 was a waste of money. Tried their entire line for 3 seasons. Really laid the product down as in over dosing the...

Need to put a multi-meter on the PTO circuit. Visual doesn't do much for wires carrying current.

Thank you for the info I visually inspected the wiring and cannot find any damage. I am thinking this short could be in the actual key...

You have a short on this circuit. Find out why and where on said circuit. Wires rubbing, mice chewing....... Call JD and ask for a...

Belt number should be Ariens 21547188 V-Belt. Your belt may not have the same angle, which is riding to low in the pulleys.. Also...

One can use a cereal box to do just that. Also hit it with some Permatex High Tack gasket sealant. Works like a charm.

Also had starter issues. Also need to check the engine mounting bolts for tightness. Be sure to pull engine shroud and check top bolt...

Most of those tow behind style aerators don't work. As in if you have hard pan clay soil, you have to get the moisture content perfect...