slomo's latest activity

More fixes have been implemented. Please report slow loading if it happens after 1:45pm EDT today.

Roughly, 18 ounces of SAE 30w oil. Stay away from multi-weight oils. They shear down quick in hot air cooled engines. Use E-0 gas if...

Looking at the last pic, those electrical terminals are filthy. Make sure you have good pin fitment and all is CLEAN.

Sounds like the battery needs to be load tested to make sure it has enough amperage. A multimeter only reads voltage. Voltage is only...

I get the Chinese clone of the Briggs 594593. Think it's good up to say 15-16HP single cylinders.

LMT's are NLA. The Briggs part number will lead you to believe it's a Walbro but it's will be a Nikki or Ruxing. If you want a LMT you...

Launched another "tab" in latest updated FireFox. No luck. Launched Edge browser. Same thing, pages do not load. For me, doesn't...

Doesn't go anywhere at all. Just times out for me on updated Firefox and Windoze 11. Pages do not load.

https://shop.briggsandstratton.com/products/briggs-and-stratton-594593-carburetor

594593

Briggs 594593. Do some research to make sure it fits yours.

It sounds like you possibly have a blob of foreign contamination floating around in the tank and it is blocking the fuel pick up line at...

Time to pressure test the carb. Forget the Lucas. 91 octane E-0 gas if you can buy it and Opti-2 oil.

Sounds like the needle is passing excess fuel possibly. 7 year old carb probably needs a rebuild.

Is it losing prime? Have the fuel lines, fuel tank grommet, and primer bulb been replaced? Has the spark arrestor screen been cleaned...