slomo's latest activity

Was the donut valve seat installed correctly and not upside down, which can cause a different float height. Also was there carb cleaner...

Try a leaf blower or compressed shop air first. Pull the engine shroud and clean the cooling fins, all around the block. I applaud...

How often do you cut your toe nails?

https://www.batterytender.com/products/battery-tender%c2%ae-junior-12v-800ma-battery-charger-available-at-walmart

12.0 needs charged. 12.6 is fully charged with no surface charge on it.

Anyone use Slime yet?

You better pray you never have to remove that tire after using cement...bad idea IMHO.

I made a post about constant site interruptions. All I got back was crickets.

there's really not much humor of this site anymore, i.e. waiting minute upon minute for pages to load. Not funny at all . . . . .

Next time test what you have prior to ordering parts. As in place the choke on partially and see how she runs. Surging is typically a...

I had a surging issue and went thru just about everything mentioned in this thread. Cleaning the carb didn’t work so I bought a new OE...

You might download your engine manual. Read it cover to cover. Lots of good tips on how to properly maintain the engine and make it last.

If you've never done one, I would read up or watch some videos on youtube. Easy if you are comfortable doing it.

Sounds like it needs the valves adjusted.

Lower the rez down if you get an upload error. Most of the time copy and paste or drag and drop works unless the pic file is too large.