Recent content by slash5bmw

There are 45 degree grease fittings in this HF package that will fit perfectly in the rims. SAE Grease Fitting Assortment, 50 Piece

I removed the grease fitting from the other wheel and was able to screw it into the wheel that lost the fitting. I was lucky that it wasn't stripped.

Guys, I greatly appreciate all the feed back. I will pull the tires, wire blush the rims, paint with pot15, lightly paint with white rust-oleum spray paint and apply bead sealer to the tires. StarTech, if you think the white spray paint is detrimental, I'll skip that step. BTW, I thought the...

Perfect! I can do that. What do you think about spraying a rust-oleum paint or a basic white paint on top of the por15 to lesson the break down with the suns uv rays. Thanks, slash

I had to use a racketing tie down a few times to get air back into the front of these wheels. The tires don't look dry rotted but there is some rust around the rim. One of the grease fitting broke on one of the wheels but I can replace that. I like have pneumatic wheels but this is become a...

I pulled the cylinder head off and immediately noticed the valve seat on the intake loose like it was before I peened it 20 years ago. I peened it again but the valve did not seat properly. I resurfaced both valve seats and lapped the valve seats. I also replaced the intake valve. 2 pulls and it...