Got new regulator and getting blue wire contact to the relay. Added pto clutch as it was over 10 ohms resostence. Now the mower sputters and cut after engaging a new pto clutch. Set the gap at .015 any suggestions. should I burnish clutch w/o belt attached?
Battery will hol charge from external charger but the charging system will not charge. When the pro is engaged the amp meter goes negative.
Stator is putting out 32-45 ac volts. New regulator installed. Seems to be losing the contact on the charging wire (blue) from the regulator where it...
Thanks for the diagram. I called sundstrand and they will rebuild for 800-1100 usd. About 3200 usd for one from scag. Sundstrund is the original oem for this tranny. The problem is play on the input actuator worn. Thanks for everyone’s help.
The Scagg mower I have recently quit working in reverse, very slow and jerky movements when applying reverse and works good in forward. the drive belt seems to be in good condition. Is this a sign that the transmission or the hydraulic pump is wearing out? Thoughts are appreciated. This is a...