Skippydiesel's latest activity

I was told 3 companies make all the Oil Filters, just paint them differently.

Hey Slomo, my oil filter is better than yours.

2 amp trickle charge is the best. Hook it up and come back next day. It will float once fully charged and not overcharge the battery...

No higher than 10A for 1hour. Place it on 2A if you have time to let it set and slow charge. 50A is for a quick start, but you risk...

Ideally it is best to go with OE when possible. Many large lumber/hardware suppliers carry genuine filters if they also sell the mowers...

No offence intended Tiger but your logic is wanting. Oil (all engine) filters are made all over the developed World, to engine maker...

Thoughts On The Matter: Problem with filters (especially the spin-on/enclosed kind) is that the end user (us) do not have the...

Because the OP probably didn't know it was a cross. Not every cross is noted on many sites. But many China filters are just as good as...

Thanks Guys, Took my old belt in to my local mower shop. They agree with your part numbers/size HOWEVER the old belt is significantly...

sometimes the rim rusts in a spot where air can escape , tire still good , remove tire clean up rust on inside of rim , repaint rim...

I am coming up with a 79109 deck using the 105-2473 belt

I'M coming up with 1/2 x 128 Kevlar

Thanks ILENGINE - what of the dimensions/specifications for the belt? :devilish:

I have an old Toro Wheel Horse 17.44 HXL Model No.71283, Serial No. 240000104 - Deck may be a Model No.79107 - mows a great lawn. This...

The cable with the spiral conduit is replaced by loosening/removing the clamp to get the cable out the other plain cable that...