sgkent's latest activity

Need torque spec for Briggs 190 cc Lhead to Toro recycler aluminum deck. I've looked everywhere and can't seem to find it. I am getting...

3 things to make a gasoline engine run right, one of them needs some help at lower speeds. Examples: Head gasket leak - compression...

It is called a Briggs and Stratton Pulse Jet. Watch these videos

also, I have not worked on that engine. However they might have an oversize guide where you could use a valve guide reamer on it then...

you can go to Briggsandstratton.com then look at new engines. They show the snout length and od in the specs. The bolt pattern shows in...

the high compression could be a bad compression release. But if you can pull it over with the rope, or the starter crank it, it should...

My suggestion as a beginning is read the manual again, see what the maintenance items are, and begin by making sure all are done...

unfortunately all the online sources show N/A on the idle jet, so the part number is not available, at least to me. Amazon has a couple...

yes. it takes 3 things to make a gasoline engine run. Always figure which one is missing before you dive in deeper. Guessing is not a...

exhaust guide looks like it has migrated. Intake could have too. I would replace the head and all the components in it at this age. You...

I had really good luck with BriggsAndStratton.com. They are the official online store, but a separate company (Outdoor Power Direct)...

sometimes the fuel stabilizers combine with water to make a gel. I've found that draining the fuel and storing it in an unvented fuel...

without a photo no way can I help much. The parts diagram makes it look it is similar to the Toro and the chute is held on with a rod...

that should have a vacuum driven fuel pump. They are about $30 - $35. They require a good vacuum line in order to work. Check both if...

Go back over your work, or get someone to help you who has the experience. If the parts you are putting back together aren't working...