sgkent's latest activity

  • sgkent
    sgkent replied to the thread Won't start on gasoline.
    or the fuel put in it has a problem. A friend one time grabbed the kerosene instead of gas. Spent a whole day trying to figure why he...
  • sgkent
    sgkent replied to the thread Edger runs, then dies..
    engine noises like a piston or rod seizing typically are thunking or knocking. A squeal is high pitched and would not get out of the...
  • sgkent
    sgkent replied to the thread Broken bolt condundrum.
    did you soak the area in Liquid Wrench or PB Blaster, Knock er Loose, etc., for 24 hours first?
  • sgkent
    sgkent replied to the thread Edger runs, then dies..
    unless you have an engine that has the kill mechanism that is shared with the choke (and some do), it should not as you said, die on all...
  • sgkent
    sgkent replied to the thread Toro Recycler Hard to Start.
    we have a 20055 that I just overhauled. It was taking 12 primes and two pulls to start cold. Had good compression, etc., just had 20...
  • sgkent
    sgkent replied to the thread Edger runs, then dies..
    I'd run over to O'Reillys, Napa, Autozone, or maybe your local larger lawn mower shop and buy a new (Probably NGK or Champion RJ19LM)...
  • sgkent
    scoring is much common on air cooled engines than water cooled. The depth of the scores will depend upon what scored it.
  • sgkent
    sgkent replied to the thread Mantis Tiller won't start.
    I would make sure that the plug is a genuine one. What happens these days is someone lets a machine like a Mantis sit. It fails to run...
  • sgkent
    sgkent replied to the thread Consider buying a leaf blower.
    ask yourself how long you will use it on each occasion. Then decide whether to go ev or gas. We have both. The ev does blow more, but...
  • sgkent
    sgkent replied to the thread Engine air flow issue?.
    does the air cleaner have a breather in it that could be spewing lots of blowby, oil or water vapor?
  • sgkent
    carbon deposits and getting hot.
  • sgkent
    sgkent replied to the thread Broken bolt condundrum.
    Don't assume that it is held in by threads and rust, although it probably is because you have already tried an extractor. The shaft and...
  • sgkent
    sometimes people clean the old plug with a wire brush and try to reuse it. Wire brushes will leave some of themselves in the porcelain...
  • sgkent
    sgkent replied to the thread Won't run under load.
    now you know the problem is that the left side is weak. One of three is missing on that cylinder - air/fuel, spark, or compression.
  • sgkent
    sgkent replied to the thread Husqvarna 125B gas blower.
    you said you tried new fuel. Did you drain the tank, and the carb, then try new fuel? If there is old fuel in the bowl, new fuel in the...
Back
Top