sgkent's latest activity

I suspect that it did more than shear the bolt that holds the blades on. It likely bent the crankshaft, certainly damaged the blade. You...

totally depends on how an engine is used and cared for.

takes 3 things to make an internal combustion engine run - fuel and air, spark at the right time, and compression. One or more is...

does it have too much compression to pull over by hand, or is it one that you pull and pull and pull but it never starts? How old is...

My two cents is that when an engine breaks a rod, parts fly around and break other things. To know what is broken you must take it...

if you are a dealer call tech support.

I'll lay odds that if you plug in a CO detector or a battery powered one it will trip too. You need to vent the exhaust gasses far...

:) I prefer to talk lawnmowers. They are easier to understand.

Get help before the depression and anger kills you. If you are trying to kill the forum, you are doing a good job of it with your anger.

some people have good days, Others never have a good day. I guess your news service has not told you that USPS is accepting packages...

there are factory catalogs of rings. They have diameter, thickness, type, tensile strength - all sorts of things. I had to match a set...

duplicate thread https://www.lawnmowerforum.com/threads/predator-9500-generator-backfiring-on-shutdown.78808/

the ignition coil has a grounding wire (kill wire) attached to it so once it is turned off it has no spark. If that is intermittent due...

does the kill wire have a good ground or is it possible rust has built up so the kill wire allows some small amount of voltage to the...

maybe first 3 minutes or so shows how to remove auger and belt. Supposedly this same model as yours but rebranded. It actually came up...