SeniorCitizen's latest activity

Is there a reason the date of a post isn't bold print ?

Many have both bearings pressed in . The last JD i replaced the bearings on had the top bearing a push fit . Those that don't have i...

The next time you have the chance measure the length of the spacer and compare that measurement to the distance apart the 2 outer...

Just now, just for Schlitz and giggles, I got the jack out of the car, jacked up the front of the Snapper, and lowered it onto the...

Those with a spacer between the 2 bearings , at minimum 1 of those 2 bearings needs to be a push fit . ie - the outer race needs to be...

They do what they say they'll do and ask for 3 references , Go see those references in person .

Is there any measures to prevent pushing the remaining seals out .

When the kid at the farmer's CO - OP told me about the side walls and they couldn't patch those those new tires because of the material...

Try searching on line for a wiring schematic . I have a older schematic but having a brain moment that keeps me from posting the pic .

QUOTE Attached car battery. Will not spin past compression stroke...

Do those nylon , brass, stainless remove the lead oxide ? A regular steel brush like we have had available for all my life won't touch...

There are battery cable / posts brushes available to clean the round connections . Is there a brush available to clean the flat terminals ?

Sounds like some sediment got in the float bowl and prevented the needle from seating and shutting off the fuel. A good carb disassembly...

Not with coffee in it and that wouldn't tell a good story . If you've not tried both methods you don't know .

So much wasted time here on a slow leak. Do the Hanes Test. Take your wifes or Girlfriends nylons and wipe it around the inside of the...