Recent content by Ru4him
-
R
What is the torque on the bolts that go into the tapered bushing or the spindle on a Ferris IS3000Z
The Model is IS3000ZLKAV2661. In the picture, the bolts are in the threaded holes of the bushing. They go in the unthreaded holes during install into the pulley. The picture is just to show which bolts I'm referring to. I know they are in the take out position. I'll align the keyway when... -
R
What is the torque on the bolts that go into the tapered bushing or the spindle on a Ferris IS3000Z
I added a picture. It's those two little bolts that presses the tapered bushing into the spindle pulley. -
R
What is the torque on the bolts that go into the tapered bushing or the spindle on a Ferris IS3000Z
What is the torque on the bolts that go into the tapered bushing on the spindle on an IS3000Z? I've snapped one off before and don't want a repeat. I'm having repeated problems with the driver's side (furthest left when seated facing forward) spindle. This is the second time the keyway wallowed...