Recent content by RonV

UPDATE: Cleaned all the battery cables, I grind the frame to bare metal for battery ground and now getting 12.6 volts to starter cable, now waiting on new starter. Thanks for all your help and will update when the starter is installed.

UPDATE: I removed the Starter and used jumper cables to the battery and it does not spin or click, I taped the starter several times with same results, going to buy new starter and try, also going to buy new cables for ground and starter to have in-case and on hand for later if needed. It it...

So your saying the cable from the Solenoid to the starter is bad because it only shows 6.7 volts and not the 12 it needs?

0nly ground wire I see is is on the Solenoid green wire that clips on, the Orange and White wire goes to the key switch I think This is the OEM Solenoid This is what I ordered on Amazon and says OEM replacement part It says the Solenoid is grounded to the frame, should I add a ground wire to...

I have a XT1 Enduro Series LT 46 in. 22 HP V-Twin Kohler Hydrostatic Gas Front-Engine and Solenoid just makes a clicking noise. I replaced the Solenoid and still makes a clicking noise, Battery is new and starts my other mower, from the battery to the Solenoid is showing 12 volts but only...