Rocky J's latest activity

Also look on the valve cover if you have one, if you don't see it ,maybe the valve cover was installed upside down and the numbers are...

Do you have the old engine removed to get measurements from ? Is your crankshaft 3/4 inch diameter ? How long is the crankshaft ? With...

https://diyengineparts.com/View/121184/briggs-and-stratton-filter-oil-194856 So if it were me, following different discussions online...

I have very good luck with this engine . https://www.harborfreight.com/65-hp-212cc-ohv-horizontal-shaft-gas-engine-epa-69730.html

That does sound like the gas tank drained into the crankcase. Possibly the noise is fuel igniting in the exhaust. Even after you change...

By looking at your picture if you removed the four bolts from the bottom of the engine it should let it slide back enough to change the...

I agree, probably not a lawn mower engine . Might be off of some generator or special machine. I think the last morph dike crankshaft I...

I have had both of these issues you mention cause clouds of white smoke. One was a dip stick from another engine tricked the user to...

https://www.surpluscenter.com/Pulleys-V-Belts/Split-Taper-Bushed-Bore-Pulleys-Hubs/Split-Taper-Bushed-Bore-Pulleys/?page_no=1&fq=ATR_Groo...

Maybe some of Jim Jones's Kool-Aid might be on the menu

I had a building with truck tire racks in it and the birds would put the white frosting on the tires like they where on the clock and...

I always like that engine in the vertical series 1 and 2 . The rebuild kits said fits all Briggs Twins . I loved that there was no push...

Maybe just a filter and top off the oil ? Here is a you tube video he shows draining it and the filter number he cross referenced to...

If you are going to try the air chisel be Shure to use a dull bit, my bit is 1 1/2 wide and I polish it with a lapping wheel to make it...

I am guessing you had to remove it to install a new belt, so it probably pulls the spindle brake off the pully when you engage the deck.