Rivets's latest activity

Sounds like your charging system is not working. With engine running, at full speed, and no blade engagement, measure voltage across...

We need model, type and code numbers. Should be stamped on one of the valve covers.

Please post engine spec number so we know which electrical setup you have. This manual may be of some help. Section 8. Im assuming...

If pulley bearings are bad the belt will not have the proper tension and will wear faster and jump off.

Sounds like rocks in pulley? Bad bearings.

Try this procedure to identify your problem. Post back with results. Electrical problems can be very easy or very difficult, depending...

Experience has told me with these tractors adding attachments is not worth the money. They are lawn tractors. The only accessories I...

If you properly maintain it, my experience says maximum of 5 years. If you get more than that you’ve got your money’s worth.

That is a belt guide. In this manual go to page 16, part number 10. Should be mounted close enough to the pulley that so the belt will...

Congrats, your patience and double checking paid off.

Used an ultrasonic cleaner since they came out, probably can count on one hand when they haven’t worked for me when used properly.

Simple answer, YES. Should add, google search “HOW DOES AN ULTRASONIC CLEANER WORK “. It should answer your questions.

Tilt switch is closed.

Post all engines numbers so we have some idea of what you are dealing with. We hate guessing.

Please post the model and serial numbers. That way I can see the entire drive system. I’m doubting the transmission is the problem.