Rivets's latest activity

Do a google search for a ONE INCH blade adapter. Should be able to find one.

Should have added, some are laser etch into the block.

It’s stamped on the shroud or valve cover. Might takes some work to find it, but it’s there.

About $400.00. You will need a starter, new flywheel, starter switch and battery. This is not counting the time to assemble everything.

Try this website...

Google search your units model number (off the ID tag) wiring diagram and you should come up with a diagram to help you troubleshoot the...

Please post the model, type and code numbers for your engine. Also post the part number for the carb you purchased. With those I may...

Looks to me exactly like a 1988 MTD 11/32. MTD made this series unit under a variety of different brand names. The Briggs engine...

With regular maintenance and not running it low on oil, around 2000 hours. You are reaching the end of the engine’s life most likely...

This coming from someone who can’t tell the difference between a vacujet and pulsajet carb. Surprised you haven’t told him that...

Slomo, please learn about vacujet carbs. I don’t know where you have gotten your knowledge about how they work, you better throw it...

slomo, you better get your eyes checked. That is a vacujet carb, not pulsajet. There is no pump, so no diaphragm. You’re sending the...

Insert the filter in the tank into the tank first, then slide the fuel line over the filter and tank outlet. No risk to damage.

Just replaced a fuel line with that filter last week. Cut the fuel line around the filter to remove it from the old line. Insert the...

If the float level is too low, it may not prime or run properly. Seat may be swollen causing the change in float level. Solution is to...