Rivets's latest activity

Slomo, please learn about vacujet carbs. I don’t know where you have gotten your knowledge about how they work, you better throw it...

slomo, you better get your eyes checked. That is a vacujet carb, not pulsajet. There is no pump, so no diaphragm. You’re sending the...

Insert the filter in the tank into the tank first, then slide the fuel line over the filter and tank outlet. No risk to damage.

Just replaced a fuel line with that filter last week. Cut the fuel line around the filter to remove it from the old line. Insert the...

If the float level is too low, it may not prime or run properly. Seat may be swollen causing the change in float level. Solution is to...

Try this old timers trick. Remove fuel inlet line from the pump. Put it into a glass jar and blow into the tank as hard as you can...

Just my opinion, I always use OEM parts bought from a dealer. That way if there is a problem I have some recourse to help in rectifying...

You said it has no choke, which means it has a primer system, right? If I’m right, have you checked to see if fuel is shooting into the...

If all pulleys and tensioner arms are moving freely the problem I found is customer is not using OEM belts. Had a customer about five...

Before you give up, remove the shroud and check to see if the starter clutch is frozen, not the piston.

I’m guessing the air filter base is warped, not allowing priming due to air leak between base and carb body.

Briggs part number 296476 pickup tubes are still available, may have to do a little searching. Also, Briggs carb number 210719 &...

First, before we can start to try to help you out we will need to have the model and serial numbers off both the unit and engine. Then...

Ideal choke position, full choke for starting an no choke for running. I see that you have not taken the time to read over the section...

Personally I wouldn’t worry about it.