Rivets's latest activity

Spindle assembly MTD part #917-0913, is available, just need to do a google search. Might try this site for the two pulleys...

First thing to check are battery cable connections, both on the battery and solenoid, plus negative chassis ground. Make sure each one...

Seeing that you don’t supply us with a model number, I suspect you have a model D engine. I agree,probably a fuel issue. Here is a...

Found this on the internet which is always 100% accurate. Key Milestones in Electric Lawn Mower Development 1920s-1930s: The first...

It may be in the manual, but why take a chance on voiding the warranty? We have a dealer in this area which will do anything to pass...

If it is new, DON’T TOUCH IT. This should have been adjusted properly by the dealer. You messing with it can void your warranty. Back...

Looks like this poster just deleted his original post and other reply, so there is no reason for this thread to be open. Must have had...

Or it could be that the float needle is stuck open and the crankcase is now filled with gas. Pull the dipstick and check to see if it...

I suspect that the linkages are not hooked up correctly. This manual should help you double check your assemblies...

Without the engine numbers I’m assuming you have a Briggs engine with the primer bulb mounted in the air filter base. Most times the...

Simple test before throwing time and money at this engine. Before opening the engine hook a VOLT meer across the battery and watch the...

Please post the model, type and code number from the engine. Also post the part number for the new coil you purchased. It would not be...

If used properly, I’ve found that leaf blowers definitely have a place in lawn maintenance, especially as you get older. Raking at my...

Hey Doc, do you realize that this thread is over a year old?

Oh boy you would need some very deep pockets. You are better off just buying a factory built electric mower if you wish to change from...